IBM SMF Explorer
GitHubToggle Dark/Light/Auto modeToggle Dark/Light/Auto modeToggle Dark/Light/Auto modeBack to homepage

SMF 73 Subtype 1

Virtual fields

NameBased onDescription
timestampdate
time
Record Timestamp
boost_classflaBoost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process

Record fields

NameBased onDescriptionType/Format
dateSMF73DTEDate of Recorddate
timeSMF73TMETime of Recordtime
timestamp virtualdate
time
Record Timestamp
lenSMF73LENSMF RECORD LENGTH. ZERO AFTER GRBSMFR REASSEMBLYinteger
segSMF73SEGSEGMENT DESCRIPTORinteger
flg flagSMF73FLGSYSTEM INDICATOR FLAGSstring
rrfflgNEW RECORD FORMAT
sutflgSUBTYPES USED
v4flgMVS/ESA V4 IF ON
esaflgMVS/ESA IF ON
vxaflgMVS/XA IF ON
osflgOPERATING SYSTEM IS OS/VS2
bfyflgSYSTEM RUNNING IN PR/SM MODE
rtySMF73RTYRECORD TYPEinteger
tmeSMF73TMETIME RECORD WRITTENtime
dteSMF73DTEDATE RECORD WRITTENdate
sidSMF73SIDSYSTEM ID FROM INSTALLATIONstring
ssiSMF73SSISUBSYSTEM ID (RMF )string
stySMF73STYSUBTYPEinteger
trnSMF73TRNNUMBER OF TRIPLETS IN THIS RECinteger
prsSMF73PRSOFFSET TO RMF PRODUCT SECTIONinteger
prlSMF73PRLLENGTH OF RMF PRODUCT SECTIONinteger
prnSMF73PRNNUMBER OF RMF PRODUCT SECTIONSinteger
hisSMF73HISOFFSET TO CHANNEL PATH CONTROL SECTIONinteger
hilSMF73HILLENGTH OF CHANNEL PATH CONTROL SECTIONinteger
hinSMF73HINNUMBER OF CHANNEL PATH CONTROL SECTIONSinteger
hpsSMF73HPSOFFSET TO CHANNEL PATH DATA SECTIONinteger
hplSMF73HPLLENGTH OF CHANNEL PATH DATA SECTIONinteger
hpnSMF73HPNNUMBER OF CHANNEL PATH DATA SECTIONSinteger
hesSMF73HESOFFSET TO EXTENDED CHANNEL PATH DATA SECTIONinteger
helSMF73HELLENGTH OF EXTENDED CHANNEL PATH DATA SECTIONinteger
henSMF73HENNUMBER OF EXTENDED CHANNEL PATH DATA SECTIONSinteger

Maps and sections

SMF73PRO

RMF Product Section

NameBased onDescriptionType/Format
mfvSMF73MFVRMF version numberinteger
prdSMF73PRDProduct namestring
istSMF73ISTTime monitor interval starttime
datSMF73DATDate monitor interval startdate
intSMF73INTDuration of monitor intervaltime
samSMF73SAMNumber of samplesinteger
fla flagSMF73FLAFlagsstring
cnvflaData converted from version 2
issflaInvalid samples to be skipped
m3rflaRecord was written by RMF Monitor III
ismflaInterval was under SMF control
rclflaSMF record converted to lower service level. Bit is set by SMF record retrieval service GRBSMFR.
rchflaSMF record converted to higher release or service level. Bit is set by SMF record retrieval service GRBSMFR.
altvmflaRunning under an alternate virtual machine environment
ziip_boostflazIIP boost was active during entire interval
speed_boostflaSpeed boost was active during entire interval
boost_class virtualflaBoost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process
cycSMF73CYCSampling cycle lengthtime
mvsSMF73MVSMVS software level (consists of an acronym and the version, release, and modification level - ZVvvrrmm)string
imlSMF73IMLIndicates the type of processor complex on which data measurements were taken. X'03’ = 9672, zSeriesinteger
prf flagSMF73PRFProcessor flagsstring
expanded_storprfSystem has expanded storage
escon_chprfEquipped with ESCON channel
escon_dirprfESCON Director in configuration
arch_modeprfSystem in z/ARCH mode
zaap_instprfAt least one zAAP is currently installed
ziip_instprfAt least one zIIP is currently installed
dat_facility1prfEnhanced DAT facility 1
dat_facility2prfEnhanced DAT facility 2
ptnSMF73PTNPR/SM partition numberstring
srlSMF73SRLSMF record levelinteger
ietSMF73IETInterval expiration time tokendate-time
lgoSMF73LGOOffset GMT to local timeinteger
raoSMF73RAOOffset to reassembly area relative to start of RMF product sectioninteger
ralSMF73RALLength of reassembly area. Area consists of a fixed header and a variable number of information blocks. Length depends on the record type/subtype, but is fixed for a specific type/subtypeinteger
ranSMF73RANNumber of reassembly area. This field is used to indicate whether SMF record is broken. If 0, record is not broken. If 1, record is broken. Offset and length are only valid if SMFxxRAN is 1. Reassembly area is only present in broken records.integer
oilSMF73OILOriginal interval length as defined in the session or by SMF (in seconds)integer
synSMF73SYNSYNC value in secondsinteger
gieSMF73GIEProjected gathering interval end GMT timedate-time
xnmSMF73XNMSysplex name as defined in ECVTSPLXstring
snmSMF73SNMSystem name for current system as defined in CVTSNAMEstring

SMF73CTL

Channel Path Control Section

NameBased onDescriptionType/Format
smpSMF73SMPNUMBER OF SAMPLES, WEIGHTED BY SRM, only valid if SMF73MCS = OFFinteger
cfl flagSMF73CFLConfiguration change flagsstring
config_changedcflConfiguration changed
config_change_since_iplcflConfiguration changed since last IPL
ipl_iodfcflSystem IPLed via IODF
io_token_validcflI/O Token is valid
invalid_dscflRecord may include invalid data sections
cpmfcflCPMF available
cpmf_changecflCPMF mode change used for duration report
sfl flagSMF73SFLStatus flagsstring
dcm_supportedsflDCM supported by the hardware
dcm_chsflConfiguration contains DCM managed channels
mcssfl1 = Hardware allows multiple channel subsystems
ench_ch_measurementsfl1 = Enhanced channel measurement facility available
iodf_nameSMF73TNMIODF namestring
iodf_suffixSMF73TSFSuffix of IODF Namestring
iodf_dateSMF73TDTIODF creation date mm/dd/yystring
iodf_timeSMF73TTMIODF creation time hh.mm.ssstring
crcSMF73CRCCount of times SRM has restarted the Channel Path Measurement Facility (CPMF).integer
cscSMF73CSCLast CPMF sample countinteger
tdySMF73TDYIODF creation date mm/dd/yyyystring
cmiSMF73CMICPMF mode info 0 - CPMF not active 1 - Compatibility Mode 2 - Extended Modeinteger
cssSMF73CSSChannel SubSystem Id, only valid if SMF73MCS = ONinteger

SMF73CHA

Channel Path Data Section

NameBased onDescriptionType/Format
pidSMF73PIDCHANNEL PATH IDENTIFICATIONS. THE RANGE OF VALUES IS 0 TO FFstring
fg2 flagSMF73FG2CHANNEL FLAGSstring
block_multiplexorfg2BLOCK MULTIPLEXOR
byte_multiplexorfg2BYTE MULTIPLEXOR
partial_statfg2ONLY PARTIAL STATISTICS
data_invalidfg2DATA INVALID. CHANNEL PATH WAS VARIED DURING INTERVAL
ch_path_onlinefg2CHANNEL PATH IS CURRENTLY ONLINE
ch_flags_ext flagSMF73FG3Channel flags extensionstring
es_connection_chch_flags_extES CONNECTION CHANNEL
es_connection_dirch_flags_extES CONNECTION DIRECTOR ATTACHED TO CHANNEL PATH
es_conv_chch_flags_extES CONVERSION CHANNEL
ch_path_modifiedch_flags_extChannel path modified
ch_path_deletedch_flags_extChannel path deleted
ch_path_insertedch_flags_extChannel path inserted
valid_pathch_flags_extValid Path
ch_path_sharedch_flags_extChannel path is shared between logical partitions.
fg4 flagSMF73FG4Channel path flagsstring
cpmb_invalidfg4Entry in CPMB was not valid
ctc_definedfg4Channel path is CTC defined.
ch_conversionfg4Channel conversion 3090
ch_path_dcmfg4Channel path is DCM managed
ch_charact_changedfg4Channel characteristics changed during interval
ch_path_extendedfg4Extended channel path measurements are supported
physical_networkfg4Physical-network identifiers SMF73NT1 and SMF73NT2 are valid
ch_path_busy_samplesSMF73BSYNUMBER OF SAMPLES IN WHICH THE CHANNEL PATH WAS BUSY. WEIGHTED BY SRM.integer
pbySMF73PBYPartition’s channel path busy time since last interval (in units of 1024 microseconds)integer
ptiSMF73PTIChannel path measurement interval (in units of 1024 microseconds)integer
cpdSMF73CPDChannel path description. For an explanation, you can issue the command D M=CHP.integer
acrSMF73ACRChannel Path Acronymstring
cmgSMF73CMGCPMF Channel Measurement Groupinteger
fg5 flagSMF73FG5Channel path Flagsstring
cpmf_word1fg5CPMF Channel characteristics word 1 valid
cpmf_word2fg5CPMF Channel characteristics word 2 valid
cpmf_word3fg5CPMF Channel characteristics word 3 valid
cpmf_word4fg5CPMF Channel characteristics word 4 valid
cpmf_word5fg5CPMF Channel characteristics word 5 valid
ch_path_parameterSMF73CPPChannel path parameterinteger
genSMF73GENChannel type generationinteger
eixSMF73EIXIndex to Extended Channel Data section. Only valid if SMF73XCM (bit 6 of SMF73FG4) is ONinteger
spdSMF73SPDChannel path speed at the end of interval. If channel path power (bits 4-7 of SMF73MSC) is zero, the channel path speed is in units of 100 megabits per second. Otherwise, this value must be multiplied by 10**Power to get the speed in units of bits per secondinteger
mscSMF73MSCMiscellaneousstring
powSMF73POWChannel path power at the end of interval. If non-zero, this value can be used to calculate the channel path speed (SMF73SPD * 10**Power)string
nt1SMF73NT1Physical-network identifier (PNET ID) of an Ethernet network that is accessible from the first port of the channel path. Only valid for OSD and IQD channel path types.string
nt2SMF73NT2Physical-network identifier (PNET ID) of an Ethernet network that is accessible from the second port of the channel path. Only valid for OSD channel path type.string

SMF73ECD

Extended Channel Data Section

NameBased onDescriptionType/Format
ecpSMF73ECPChannel path identifierstring

SMF73CM1

Channel data Measurement group 1

NameBased onDescriptionType/Format
tutSMF73TUTCPMF Total channel path busy Time in units of 128 microseconds short floating pointnumber
putSMF73PUTCPMF LPAR channel path busy Time in units of 128 microseconds short floating pointnumber

SMF73CM2

Channel data data Measurement group 2

NameBased onDescriptionType/Format
mbcSMF73MBCCPMF Maximum Bus Cycles per second (word 1) short floating pointnumber
mcuSMF73MCUCPMF Maximum Channel work Units per second (word 2) short floating pointnumber
mwuSMF73MWUCPMF Maximum Write data Units per second (word 3) short floating pointnumber
mruSMF73MRUCPMF Maximum Read data Units per second (word 4) short floating pointnumber
usSMF73USCPMF data Unit Size in bytes (word 5) short floating pointnumber
tbcSMF73TBCCPMF Total Bus Cycles count short floating pointnumber
tucSMF73TUCCPMF Total channel work Unit Count short floating pointnumber
pucSMF73PUCCPMF LPAR channel work Units Count short floating pointnumber
twuSMF73TWUCPMF Total Write data Units count short floating pointnumber
pwuSMF73PWUCPMF LPAR Write data Units count short floating pointnumber
truSMF73TRUCPMF Total Read data Units count short floating pointnumber
pruSMF73PRUCPMF LPAR Read data Units count short floating pointnumber

SMF73CM3

Channel data data Measurement group 3

NameBased onDescriptionType/Format
pduSMF73PDUCPMF LPAR Data Unit size in bytes (word 1) short floating pointnumber
tduSMF73TDUCPMF Total Data Unit size in bytes (word 2) short floating pointnumber
pumSMF73PUMCPMF LPAR Message sent unit size (word 3) short floating pointnumber
tumSMF73TUMCPMF Total Message sent unit size (word 4) short floating pointnumber
pmsSMF73PMSCPMF LPAR Message Sent units count short floating pointnumber
tmsSMF73TMSCPMF Total Messages Sent units count short floating pointnumber
pusSMF73PUSCPMF LPAR count of Unsuccessful attempts to Send messages short floating pointnumber
pubSMF73PUBCPMF LPAR count of Unsuccessful attempts to receive messages due to unavailable Buffers short floating pointnumber
tubSMF73TUBCPMF Total count of Unsuccessful attempts to receive messages due to unavailable Buffers short floating pointnumber
pdsSMF73PDSCPMF LPAR Data units Sent count short floating pointnumber
tdsSMF73TDSCPMF Total Data units Sent count short floating pointnumber

SMF73EM2

Extended channel data for CMG=2

NameBased onDescriptionType/Format
eocSMF73EOCTotal number of FICON command-mode operations (CPC) that have been attempted by the channel.integer
eodSMF73EODTotal number of FICON command-mode operations (CPC) that could not be initiated by the channel due to a lack of available resourcesinteger
eosSMF73EOSSummation count of FICON command-mode operations (CPC). Each time the number of FICON command-mode operations is incremented, the number of FICON command-mode operations active at the channel, including the one being initiated, is added to this fieldinteger
etcSMF73ETCTotal number of FICON transport-mode operations (CPC) that have been attempted by the channel. Zero when no zHPF.integer
etdSMF73ETDTotal number of FICON transport-mode operations (CPC) that could not be initiated by the channel due to a lack of available resources. Zero when no zHPF.integer
etsSMF73ETSSummation count of FICON transport-mode operations (CPC). Each time the number of FICON transport-mode operations is incremented, the number of transport-mode operations active at the channel, including the one being initiated, is added to this field. Zero when no zHPF.integer