SMF 74 Subtype 2
| Name | Based on | Description |
|---|---|---|
| timestamp | date time | Record Timestamp |
| boost_class | fla | Boost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process |
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| date | SMF74DTE | Date of Record | date |
| time | SMF74TME | Time of Record | time |
| timestamp virtual | date time | Record Timestamp | |
| len | SMF74LEN | SMF RECORD LENGTH. ZERO AFTER GRBSMFR REASSEMBLY | integer |
| seg | SMF74SEG | SEGMENT DESCRIPTOR | integer |
| flg flag | SMF74FLG | SYSTEM INDICATOR FLAGS | string |
| rrf | flg | NEW RECORD FORMAT | |
| sut | flg | SUBTYPES USED | |
| v4 | flg | MVS/ESA V4 IF ON | |
| esa | flg | MVS/ESA IF ON | |
| vxa | flg | MVS/XA IF ON | |
| os | flg | OPERATING SYSTEM IS OS/VS2 | |
| bfy | flg | SYSTEM RUNNING IN PR/SM MODE | |
| rty | SMF74RTY | RECORD TYPE | integer |
| tme | SMF74TME | TIME RECORD WRITTEN | time |
| dte | SMF74DTE | DATE RECORD WRITTEN | date |
| sid | SMF74SID | SYSTEM ID FROM INSTALLATION | string |
| ssi | SMF74SSI | SUBSYSTEM ID (RMF ) | string |
| sty | SMF74STY | SUBTYPE | integer |
| trn | SMF74TRN | NUMBER OF TRIPLETS IN THIS REC | integer |
| prs | SMF74PRS | OFFSET TO RMF PRODUCT SECTION | integer |
| prl | SMF74PRL | LENGTH OF RMF PRODUCT SECTION | integer |
| prn | SMF74PRN | NUMBER OF RMF PRODUCT SECTIONS | integer |
| co | SMF742CO | Offset to control data section | integer |
| cl | SMF742CL | Length of control data section | integer |
| cn | SMF742CN | Number of control data sections | integer |
| so | SMF742SO | Offset to system data section | integer |
| sl | SMF742SL | Length of system data section | integer |
| sn | SMF742SN | Number of system data section | integer |
| po | SMF742PO | Offset to path data section | integer |
| pl | SMF742PL | Length of path data section | integer |
| pn | SMF742PN | Number of path data sections | integer |
| mo | SMF742MO | Offset to Member data section | integer |
| ml | SMF742ML | Length of member data section | integer |
| mn | SMF742MN | Number of member data sections | integer |
RMF Product Section
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| mfv | SMF74MFV | RMF version number | integer |
| prd | SMF74PRD | Product name | string |
| ist | SMF74IST | Time monitor interval start | time |
| dat | SMF74DAT | Date monitor interval start | date |
| int | SMF74INT | Duration of monitor interval | time |
| sam | SMF74SAM | Number of samples | integer |
| fla flag | SMF74FLA | Flags | string |
| cnv | fla | Data converted from version 2 | |
| iss | fla | Invalid samples to be skipped | |
| m3r | fla | Record was written by RMF Monitor III | |
| ism | fla | Interval was under SMF control | |
| rcl | fla | SMF record converted to lower service level. Bit is set by SMF record retrieval service GRBSMFR. | |
| rch | fla | SMF record converted to higher release or service level. Bit is set by SMF record retrieval service GRBSMFR. | |
| altvm | fla | Running under an alternate virtual machine environment | |
| iip | fla | zIIP boost was active during entire interval | |
| eed | fla | Speed boost was active during entire interval | |
| boost_class virtual | fla | Boost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process | |
| cyc | SMF74CYC | Sampling cycle length | time |
| mvs | SMF74MVS | MVS software level (consists of an acronym and the version, release, and modification level - ZVvvrrmm) | string |
| iml | SMF74IML | Indicates the type of processor complex on which data measurements were taken. X'03’ = 9672, zSeries | integer |
| prf flag | SMF74PRF | Processor flags | string |
| qes | prf | System has expanded storage | |
| cne | prf | Equipped with ESCON channel | |
| drc | prf | ESCON Director in configuration | |
| eme | prf | System in z/ARCH mode | |
| pri | prf | At least one zAAP is currently installed | |
| prp | prf | At least one zIIP is currently installed | |
| ped | prf | Enhanced DAT facility 1 | |
| pe2 | prf | Enhanced DAT facility 2 | |
| ptn | SMF74PTN | PR/SM partition number | string |
| srl | SMF74SRL | SMF record level | integer |
| iet | SMF74IET | Interval expiration time token | string |
| lgo | SMF74LGO | Offset GMT to local time | integer |
| rao | SMF74RAO | Offset to reassembly area relative to start of RMF product section | integer |
| ral | SMF74RAL | Length of reassembly area. Area consists of a fixed header and a variable number of information blocks. Length depends on the record type/subtype, but is fixed for a specific type/subtype | integer |
| ran | SMF74RAN | Number of reassembly area. This field is used to indicate whether SMF record is broken. If 0, record is not broken. If 1, record is broken. Offset and length are only valid if SMFxxRAN is 1. Reassembly area is only present in broken records. | integer |
| oil | SMF74OIL | Original interval length as defined in the session or by SMF (in seconds) | integer |
| syn | SMF74SYN | SYNC value in seconds | integer |
| gie | SMF74GIE | Projected gathering interval end GMT time | date-time |
| xnm | SMF74XNM | Sysplex name as defined in ECVTSPLX | string |
| snm | SMF74SNM | System name for current system as defined in CVTSNAME | string |
System Data
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| r742snme | R742SNME | System name | string |
| r742sstf flag | R742SSTF | Status flags | string |
| r742sact | r742sstf | System became active during this interval | |
| r742siac | r742sstf | System became inactive during this interval | |
| r742sres | r742sstf | Counts reset by XCF during this interval | |
| r742spar | r742sstf | Partially not active during RMF post processor interval. | |
| r742sdir flag | R742SDIR | Direction | string |
| r742sin | r742sdir | Inbound | |
| r742sout | r742sdir | Outbound | |
| r742slcl | r742sdir | Local | |
| r742spth | R742SPTH | Current number of paths in service. Zero for local entry. If outbound entry, count is for indicated transport class | integer |
| r742sbsy | R742SBSY | Number of no buffer conditions. For local or outbound entry, count is for indicated transport class. | integer |
| r742snop | R742SNOP | Number of no path conditions Zero for local entry. For outbound entry, count is for indicated transport class | integer |
| r742smxb | R742SMXB | Maximum 1K blocks of message buffer space. For local or outbound entry, count is for indicated transport class | integer |
| r742sbig | R742SBIG | Number of message too big conditions. Zero for inbound entry. | integer |
| r742sfit | R742SFIT | Number of messages that fits in buffer. Zero for inbound entry. | integer |
| r742ssml | R742SSML | Number of messages too small conditions. Zero for inbound entry. | integer |
| r742sovr | R742SOVR | Number of messages for which signalling service was optimized. Zero for inbound entry. | integer |
| r742stcl | R742STCL | Message length for transport class. Zero for inbound entry. | integer |
| r742stcn | R742STCN | Transport class name. Blanks for inbound entry. | string |
Path Data
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| r742pnme | R742PNME | System name | string |
| r742pdev | R742PDEV | Device number | string |
| r742pstf flag | R742PSTF | Status flags | string |
| r742pact | r742pstf | Path became active during this interval | |
| r742piac | r742pstf | Path became inactive during this interval | |
| r742pres | r742pstf | Counts reset by XCF during this interval | |
| r742pdir flag | R742PDIR | Direction path | string |
| r742pin | r742pdir | Inbound path | |
| r742pout | r742pdir | Outbound path | |
| r742ptyp | R742PTYP | Path type indicator: ‘01’x for CTC, ‘03’x for list structure | integer |
| r742pona | R742PONA | Name of system on other end if known, otherwise blanks. | string |
| r742podv | R742PODV | Device number on other end if known, otherwise blanks. | string |
| r742psta flag | R742PSTA | Path status | string |
| r742pst | r742psta | Starting | |
| r742prs | r742psta | Restarting | |
| r742pwk | r742psta | Working | |
| r742psp | r742psta | Stopping | |
| r742plk | r742psta | Waiting for completion of communication link. | |
| r742pnp | r742psta | Not operational. Path defined to XCF but not usable until hardware and/or definition problems are resolved | |
| r742psf | r742psta | Stop failed | |
| r742prb | r742psta | Rebuilding | |
| r742pstm flag | R742PSTM | More path status flags | string |
| r742pqg | r742pstm | Quiescing | |
| r742pqd | r742pstm | Quiesced | |
| r742pret | R742PRET | Path retry limit | integer |
| r742prst | R742PRST | Number of restarts | integer |
| r742pmxm | R742PMXM | Maximum number of 1K blocks message buffer space. | integer |
| r742psig | R742PSIG | Number of outbound (inbound) signals sent (received) over path. | integer |
| r742pqln | R742PQLN | Number of outbound signals pending transfer on path | integer |
| r742pibr | R742PIBR | Number of inbound signals refused due to maximum message limit. | integer |
| r742psus | R742PSUS | Number of outbound signals satisfied by suspended path. | integer |
| r742papp | R742PAPP | Number of outbound signal requests satisfied by this path while active. | integer |
| r742ptcn | R742PTCN | Transport class name. For an outbound path, the class to which the path is assigned. For an inbound path, the class to which the outbound side of the path is assigned, blanks if not known. | string |
| r742pstr | R742PSTR | Name of XES list structure being used as a path, blank for CTC’s | string |
| r742piot | R742PIOT | For inbound paths: Average I/O transfer time for the most recently received signals. Units: Micro Seconds. Zero if not available. X’FFFFFFFF’ if overflow (more than 35 minutes) | integer |
| r742prct | R742PRCT | Path retry count | integer |
| r742ppnd | R742PPND | The current number of signals pending transfer on the path (outbound only) | integer |
| r742puse | R742PUSE | The current number of 1K byte blocks of message buffer space in use by this path | integer |
| r742plin | R742PLIN | List number within structure | integer |
| r742pusg_timesum | R742PUSG_TIMESUM | Total time this path was in use at the indicated percent utilization (in ms) | integer |
| r742pusg_timessq | R742PUSG_TIMESSQ | Squared microseconds this path was in use at the indicated percent utilization | integer |
| r742pusg_timenum | R742PUSG_TIME# | Number of times this path was in use at the indicated percent utilization | integer |
| r742pusg_sigcnt | R742PUSG_SIGCNT | Number of signals sent for this usage entry | integer |
| r742pusg_percent | R742PUSG_PERCENT | Percent utilization this entry represents | integer |
| r742pnib_timesum | R742PNIB_TIMESUM | Total time this path had a no-inbound-buffer impact condition (in ms) | integer |
| r742pnib_timessq | R742PNIB_TIMESSQ | Squared microseconds for each no-inbound-buffer impact condition | integer |
| r742pnib_timenum | R742PNIB_TIME# | Number of times this path was impacted by a no-inbound-buffer condition | integer |
Member Data
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| r742msys | R742MSYS | System name | string |
| r742mgrp | R742MGRP | Group name | string |
| r742mmem | R742MMEM | Member name | string |
| r742mstf flag | R742MSTF | Status flags | string |
| r742mact | r742mstf | Member became active during this interval | |
| r742miac | r742mstf | Member became inactive during this interval | |
| r742mres | r742mstf | Counts reset by XCF during this interval | |
| r742mpar | r742mstf | Partially not active during RMF post processor interval | |
| r742mnoq | r742mstf | No information returned from IXCQUERY | |
| r742mst1 | R742MST1 | Extended member state (1) 2=CREATED, 3=ACTIVE, 4=QUIESCED, 5=FAILED | integer |
| r742mst2 flag | R742MST2 | Extended member state (2) | string |
| r742mssm | r742mst2 | System status update missing | |
| r742mtrm | r742mst2 | System termination started | |
| r742mmsm | r742mst2 | Status update missing (confirmed) | |
| r742mmsd | r742mst2 | Status update missing (not confirmed) | |
| r742mrem | r742mst2 | Monitoring has been removed | |
| r742msnt | R742MSNT | Number of signals sent by member. | integer |
| r742mrcv | R742MRCV | Number of signals received by member. | integer |
| r742mint | R742MINT | Status checking interval | integer |
| r742mjob | R742MJOB | Job name that joined the member | string |