SMF 79 Subtype 1
Name | Based on | Description |
---|---|---|
timestamp | date time | Record Timestamp |
boost_class | fla | Boost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process |
Name | Based on | Description | Type/Format |
---|---|---|---|
date | SMF79DTE | Date of Record | date |
time | SMF79TME | Time of Record | time |
timestamp virtual | date time | Record Timestamp | |
len | SMF79LEN | SMF RECORD LENGTH. ZERO AFTER GRBSMFR REASSEMBLY | integer |
seg | SMF79SEG | SEGMENT DESCRIPTOR | integer |
flg flag | SMF79FLG | SYSTEM INDICATOR FLAGS | string |
rrf | flg | NEW RECORD FORMAT | |
sut | flg | SUBTYPES USED | |
v4 | flg | MVS/ESA V4 IF ON | |
esa | flg | MVS/ESA IF ON | |
vxa | flg | MVS/XA IF ON | |
os | flg | OPERATING SYSTEM IS OS/VS2 | |
bfy | flg | SYSTEM RUNNING IN PR/SM MODE | |
rty | SMF79RTY | RECORD TYPE | integer |
tme | SMF79TME | TIME RECORD WRITTEN | time |
dte | SMF79DTE | DATE RECORD WRITTEN | date |
sid | SMF79SID | SYSTEM ID FROM INSTALLATION | string |
ssi | SMF79SSI | SUBSYSTEM ID (RMF ) | string |
sty | SMF79STY | SUBTYPE | integer |
trn | SMF79TRN | NUMBER OF TRIPLETS IN THIS REC | integer |
prs | SMF79PRS | OFFSET TO RMF PRODUCT SECTION | integer |
prl | SMF79PRL | LENGTH OF RMF PRODUCT SECTION | integer |
prn | SMF79PRN | NUMBER OF RMF PRODUCT SECTIONS | integer |
mcs | SMF79MCS | OFFSET TO MONITOR II CONTROL SECTION | integer |
mcl | SMF79MCL | LENGTH OF MONITOR II CONTROL SECTION | integer |
mcn | SMF79MCN | NUMBER OF MONITOR II CONTROL SECTION | integer |
ass | SMF79ASS | OFFSET TO DATA SECTION | integer |
asl | SMF79ASL | LENGTH OF DATA SECTION | integer |
asn | SMF79ASN | NUMBER OF DATA SECTION | integer |
dcs | SMF79DCS | OFFSET TO DATA CONTROL SECTION | integer |
dcl | SMF79DCL | LENGTH OF DATA CONTROL SECTION | integer |
dcn | SMF79DCN | NUMBER OF DATA CONTROL SECTION | integer |
qss | SMF79QSS | OFFSET IOQ GLOBAL SECTION | integer |
qsl | SMF79QSL | LENGTH IOQ GLOBAL SECTION | integer |
qsn | SMF79QSN | NUMBER IOQ GLOBAL SECTION | integer |
RMF Product Section
Name | Based on | Description | Type/Format |
---|---|---|---|
mfv | SMF79MFV | RMF version number | integer |
prd | SMF79PRD | Product name | string |
ist | SMF79IST | Time monitor interval start | time |
dat | SMF79DAT | Date monitor interval start | date |
int | SMF79INT | Duration of monitor interval | time |
sam | SMF79SAM | Number of samples | integer |
fla flag | SMF79FLA | Flags | string |
cnv | fla | Data converted from version 2 | |
iss | fla | Invalid samples to be skipped | |
m3r | fla | Record was written by RMF Monitor III | |
ism | fla | Interval was under SMF control | |
rcl | fla | SMF record converted to lower service level. Bit is set by SMF record retrieval service GRBSMFR. | |
rch | fla | SMF record converted to higher release or service level. Bit is set by SMF record retrieval service GRBSMFR. | |
altvm | fla | Running under an alternate virtual machine environment | |
iip | fla | zIIP boost was active during entire interval | |
eed | fla | Speed boost was active during entire interval | |
boost_class virtual | fla | Boost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process | |
cyc | SMF79CYC | Sampling cycle length | time |
mvs | SMF79MVS | MVS software level (consists of an acronym and the version, release, and modification level - ZVvvrrmm) | string |
iml | SMF79IML | Indicates the type of processor complex on which data measurements were taken. X'03’ = 9672, zSeries | integer |
prf flag | SMF79PRF | Processor flags | string |
qes | prf | System has expanded storage | |
cne | prf | Equipped with ESCON channel | |
drc | prf | ESCON Director in configuration | |
eme | prf | System in z/ARCH mode | |
pri | prf | At least one zAAP is currently installed | |
prp | prf | At least one zIIP is currently installed | |
ped | prf | Enhanced DAT facility 1 | |
pe2 | prf | Enhanced DAT facility 2 | |
ptn | SMF79PTN | PR/SM partition number | string |
srl | SMF79SRL | SMF record level | integer |
iet | SMF79IET | Interval expiration time token | date-time |
lgo | SMF79LGO | Offset GMT to local time | integer |
rao | SMF79RAO | Offset to reassembly area relative to start of RMF product section | integer |
ral | SMF79RAL | Length of reassembly area. Area consists of a fixed header and a variable number of information blocks. Length depends on the record type/subtype, but is fixed for a specific type/subtype | integer |
ran | SMF79RAN | Number of reassembly area. This field is used to indicate whether SMF record is broken. If 0, record is not broken. If 1, record is broken. Offset and length are only valid if SMFxxRAN is 1. Reassembly area is only present in broken records. | integer |
oil | SMF79OIL | Original interval length as defined in the session or by SMF (in seconds) | integer |
syn | SMF79SYN | SYNC value in seconds | integer |
gie | SMF79GIE | Projected gathering interval end GMT time | date-time |
xnm | SMF79XNM | Sysplex name as defined in ECVTSPLX | string |
snm | SMF79SNM | System name for current system as defined in CVTSNAME | string |
Common record 79 header
Name | Based on | Description | Type/Format |
---|---|---|---|
r79gtod | R79GTOD | Time when the call to data gatherer was issued | time |
r79lf2 flag | R79LF2 | Flag byte | string |
r79par | r79lf2 | Not enough relocate section to complete data gathering | |
r79sg | r79lf2 | Report sorted by SG | |
r79rsm | r79lf2 | Invalid RSM data obtained | |
r79goal | r79lf2 | System is in GOAL mode | |
r79trxi | r79lf2 | Invalid transaction data | |
r79srmc | r79lf2 | SRM mode changed | |
r79inv | r79lf2 | inval. data fr. Mon I (DEV PGSP IOQ) | |
r79maxd | r79lf2 | Incomplete device data due to too many devices | |
r79ses | R79SES | Session name | string |
r79user | R79USER | User field | integer |
r79rid | R79RID | Measurement name | string |
r79ctxtl | R79CTXTL | Length of command text | integer |
r79ctext | R79CTEXT | Command text | string |
r79dtxtl | R79DTXTL | Length default DR text | integer |
r79dtext | R79DTEXT | Default DR text | string |
r79ist | R79IST | Monitor I interval start time | time |
r79tsr | R79TSR | Total number of small records | integer |
r79tot | R79TOT | Total number of data sections in large record | integer |
r79nxt | R79NXT | Number of data sections in following small records | integer |
r79iwmtk | R79IWMTK | Token returned from IWMRCOLL service | string |
Mapping of element
Name | Based on | Description | Type/Format |
---|---|---|---|
r791asid | R791ASID | ASID number | integer |
r791jbn | R791JBN | Name of job | string |
r791ttod | R791TTOD | Real time into transaction (milliseconds) | integer |
r791cl | R791CL | Current location IN - In storage, OT - Swapped out and ready, LO - Logically swapped out, NS - Non swappable, WM - Wait queue/MSO, WL - Wait queue/long wait, WT - Wait queue/term wait, WO - Wait queue/others, DL - TSO user delayed by SRM to meet response time objective, PR - Privileged, » - Transitioning out, « - Transitioning in | string |
r791tas | R791TAS | Type of user 0 - Batch, 1 - Started task, 2 - Mount task, 3 - TSO, 4 - ASCH, 5 - OMVS | integer |
r791src | R791SRC | Reason last swap out TO - Terminal output, TI - Terminal input, LW - LONG WAIT, XS - AUX storage short, RS - Real storage short, DW - Detected wait, MP - MEMORY POOL SHORTAGE, NQ - CAP enqueue, EX - CAP exchange, US - CAP uni-swap, TS - Transition, IC - Improve central storage usage, IP - Improve system paging rate, MR - Make room to swap in an out-too-long user, AW - APPC wait, IW - OMVS input wait, OW - OMVS output wait, SR - In-real swap, 00 - Unknown | string |
r791dp | R791DP | Dispatcher priority | integer |
r791swc | R791SWC | Transaction swap count | integer |
r791swmr | R791SWMR | SRM workload recom value | integer |
r791wms | R791WMS | SRM service for the current transaction since the last swap in | integer |
r791tcpu | R791TCPU | Total CPU time consumed on behalf of this address space in milliseconds (ascbejst+ascbsrbt+assbasst). Wraps after 4 Giga millisec | integer |
r791esct | R791ESCT | Number of expanded storage frames used by job | integer |
r791pin | R791PIN | Page in count | integer |
r791trtm | R791TRTM | Transaction residency time | integer |
r791flg flag | R791FLG | Flags | string |
r791xm | r791flg | Cross memory address space | |
r791pmon | r791flg | On = data in R791CTAR is valid. Off = not valid. | |
r791valv | r791flg | On = data in R791VAL is valid. Off = not valid | |
r791goal | r791flg | On = system is in GOAL mode | |
r791srv | r791flg | On = this address space is a server address space Off = GOAL specified for this address space is being honored by wlm | |
r791qsc | r791flg | On = address space has been quiesced by a RESET command | |
r791txme | r791flg | Address space matched a classification rule in the active policy which prevents managing the region based on the response time goals of its served transactions | |
r791taff | r791flg | On = address space has temporal affinities, same as RASDTAF | |
r791flg2 flag | R791FLG2 | Additional flags | string |
r791cprc | r791flg2 | Service class assigned by classification or RESET SRVCLASS was designated CPU-critical in the active policy | |
r791cpre | r791flg2 | Address space matched a classification rule in the active policy which was designated storage-critical | |
r791cpri | r791flg2 | Address space is serving transactions which belong to a service class that was designated storage-critical in the active policy’s classification rule, or is running in SYSTEM/SYSSTC | |
r791cpup | r791flg2 | CPU protection was assigned either to the address space or to transaction service classes being served by the space or implicitly | |
r791stop | r791flg2 | Storage protection was assigned either to the address space or to transaction service classes being served by the space | |
r791crmp | r791flg2 | The dispatch priority of the address space is currently promoted due to a chronic resource contention | |
r791txmb | r791flg2 | Address space is a CICS TOR that matched a classification rule in the active policy which allows managing the region based on the region goals but also ensures that completed transactions are reported and used for management of the CICS AORs | |
r791nohp | r791flg2 | Honor priority ineligibility was assigned either to the address space or to transaction service classes being served by the space | |
r791fmct | R791FMCT | Number of real storage frames | integer |
r791wss | R791WSS | Working set at last swap in | integer |
r791twss | R791TWSS | SRM target working set set site | integer |
r791eshp | R791ESHP | Number of hiperspace ES pages used by job | integer |
r791esvi | R791ESVI | Number of VIO ES pages used by job | integer |
r791hin | R791HIN | Number of hiperspace page ins by job | integer |
r791hrms | R791HRMS | Number of hiperspace read misses by job | integer |
r791bpin | R791BPIN | Number of blocked pages brought in from DASD | integer |
r791pine | R791PINE | Number of single pages brought in from expanded storage | integer |
r791bpne | R791BPNE | Number of blocked pages brought in from expanded storage | integer |
r791ctar | R791CTAR | Central storage target number of frames | integer |
r791val | R791VAL | Recommendation value for WSM managed address spaces. | integer |
r791scl | R791SCL | Service class name | string |
r791scp | R791SCP | Service class period | integer |
r791wkld | R791WKLD | Workload name | string |
r791rgrp | R791RGRP | Resource group name | string |
r791spi | R791SPI | Number of page-ins from auxiliary storage for shared page groups | integer |
r791cmni | R791CMNI | Number of common pages for current transaction | integer |
r791pnv | R791PNV | Number of non-VIO pages for current transaction | integer |
r791pvio | R791PVIO | Number of VIO pages for current transaction | integer |
r791exct | R791EXCT | EXCP count for this step | integer |
r791tcpc | R791TCPC | Total CPU time consumed in this address space in milliseconds. (ascbejst+ascbsrbt+assbphtm) +(assbphtm-assbphtm_base)) | integer |
r791asst | R791ASST | CPU time consumed by preemptible class SRBs running on behalf of this AS in milliseconds. (assbasst) | integer |
r791phtm | R791PHTM | CPU time consumed by preemptible class SRBs running in this AS in millisecs. (assbphtm) | integer |
r791rcl | R791RCL | Report class name | string |
r791mlim | R791MLIM | Address space memory limit in units of MB | integer |
r791tifa | R791TIFA | CPU time consumed on zAAPs (ASSB_TIME_ON_IFA) | integer |
r791tcp | R791TCP | CPU time consumed on standard CPs (ASSB_TIME_ON_CP). Only valid if zAAPs or zIIPs in configuration | integer |
r791tifc | R791TIFC | CPU time consumed on standard CPs by zAAP eligible work (ASSB_TIME_IFA_ON_CP) | integer |
r791nffi | R791NFFI | Normalization factor for zAAP service time. Used to convert between real zAAP times and “normalized” zAAP times, i.e. the equivalent time on a standard CP. Multiply R791TIFA by this value and divide by 256 to calculate the normalized zAAP time | integer |
r791tsup | R791TSUP | CPU time consumed on zIIPs (ASSB_TIME_ON_zIIP) | integer |
r791tsuc | R791TSUC | CPU time consumed on standard CPs by zIIP eligible work (ASSB_TIME_zIIP_ON_CP) | integer |
r791nffs | R791NFFS | Normalization factor for zIIP service time. Used to convert between real zIIP times and “normalized” zIIP times, i.e. the equivalent time on a standard CP. Multiply R791TSUP by this value and divide by 256 to calculate the normalized zIIP time. | integer |
r791excw | R791EXCW | EXCP Count ( DWord ) | integer |
r791phta | R791PHTA | zAAP-only equivalent of R791PHTM (ASSB_IFA_PHTM). This is normalized time | integer |
r791phti | R791PHTI | zIIP-only equivalent of R791PHTM (ASSB_zIIP_PHTM). This is normalized time | integer |
r791flg3 flag | R791FLG3 | Additional flags | string |
r791cipg | r791flg3 | Service class was assigned by classification, or RESET SRVCLASS belongs to I/O priority group HIGH in the active policy | |
r791iopg | r791flg3 | I/O priority group HIGH was assigned either to the address space or to transaction service classes served by the address space | |
r791itrg | r791flg3 | R791RGRP is the name of a tenant resource group and R791RCL is the name of a tenant report class | |
r791iisp | r791flg3 | General purpose and specialty processor consumption is considered by WLM capping algorithms for this address space | |
r791irpb | r791flg3 | On = data in R791RPBoost is valid. Off = not valid | |
r791rpboost | r791flg3 | Address space matched a classification rule in the active policy which enables for recovery process boost. Only valid if R791IRPB = On. | |
r791ccimp | r791flg3 | CPU protection was implicitly assigned |