SMF 79 Subtype 3
| Name | Based on | Description |
|---|---|---|
| timestamp | date time | Record Timestamp |
| boost_class | fla | Boost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process |
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| date | SMF79DTE | Date of Record | date |
| time | SMF79TME | Time of Record | time |
| timestamp virtual | date time | Record Timestamp | |
| len | SMF79LEN | SMF RECORD LENGTH. ZERO AFTER GRBSMFR REASSEMBLY | integer |
| seg | SMF79SEG | SEGMENT DESCRIPTOR | integer |
| flg flag | SMF79FLG | SYSTEM INDICATOR FLAGS | string |
| rrf | flg | NEW RECORD FORMAT | |
| sut | flg | SUBTYPES USED | |
| v4 | flg | MVS/ESA V4 IF ON | |
| esa | flg | MVS/ESA IF ON | |
| vxa | flg | MVS/XA IF ON | |
| os | flg | OPERATING SYSTEM IS OS/VS2 | |
| bfy | flg | SYSTEM RUNNING IN PR/SM MODE | |
| rty | SMF79RTY | RECORD TYPE | integer |
| tme | SMF79TME | TIME RECORD WRITTEN | time |
| dte | SMF79DTE | DATE RECORD WRITTEN | date |
| sid | SMF79SID | SYSTEM ID FROM INSTALLATION | string |
| ssi | SMF79SSI | SUBSYSTEM ID (RMF ) | string |
| sty | SMF79STY | SUBTYPE | integer |
| trn | SMF79TRN | NUMBER OF TRIPLETS IN THIS REC | integer |
| prs | SMF79PRS | OFFSET TO RMF PRODUCT SECTION | integer |
| prl | SMF79PRL | LENGTH OF RMF PRODUCT SECTION | integer |
| prn | SMF79PRN | NUMBER OF RMF PRODUCT SECTIONS | integer |
| mcs | SMF79MCS | OFFSET TO MONITOR II CONTROL SECTION | integer |
| mcl | SMF79MCL | LENGTH OF MONITOR II CONTROL SECTION | integer |
| mcn | SMF79MCN | NUMBER OF MONITOR II CONTROL SECTION | integer |
| ass | SMF79ASS | OFFSET TO DATA SECTION | integer |
| asl | SMF79ASL | LENGTH OF DATA SECTION | integer |
| asn | SMF79ASN | NUMBER OF DATA SECTION | integer |
| dcs | SMF79DCS | OFFSET TO DATA CONTROL SECTION | integer |
| dcl | SMF79DCL | LENGTH OF DATA CONTROL SECTION | integer |
| dcn | SMF79DCN | NUMBER OF DATA CONTROL SECTION | integer |
| qss | SMF79QSS | OFFSET IOQ GLOBAL SECTION | integer |
| qsl | SMF79QSL | LENGTH IOQ GLOBAL SECTION | integer |
| qsn | SMF79QSN | NUMBER IOQ GLOBAL SECTION | integer |
RMF Product Section
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| mfv | SMF79MFV | RMF version number | integer |
| prd | SMF79PRD | Product name | string |
| ist | SMF79IST | Time monitor interval start | time |
| dat | SMF79DAT | Date monitor interval start | date |
| int | SMF79INT | Duration of monitor interval | time |
| sam | SMF79SAM | Number of samples | integer |
| fla flag | SMF79FLA | Flags | string |
| cnv | fla | Data converted from version 2 | |
| iss | fla | Invalid samples to be skipped | |
| m3r | fla | Record was written by RMF Monitor III | |
| ism | fla | Interval was under SMF control | |
| rcl | fla | SMF record converted to lower service level. Bit is set by SMF record retrieval service GRBSMFR. | |
| rch | fla | SMF record converted to higher release or service level. Bit is set by SMF record retrieval service GRBSMFR. | |
| altvm | fla | Running under an alternate virtual machine environment | |
| iip | fla | zIIP boost was active during entire interval | |
| eed | fla | Speed boost was active during entire interval | |
| boost_class virtual | fla | Boost class is set at end of interval, valid only when zIIP boost and/or Speed boost is active: 001 IPL, 010 Shutdown, 011 Recovery Process | |
| cyc | SMF79CYC | Sampling cycle length | time |
| mvs | SMF79MVS | MVS software level (consists of an acronym and the version, release, and modification level - ZVvvrrmm) | string |
| iml | SMF79IML | Indicates the type of processor complex on which data measurements were taken. X'03’ = 9672, zSeries | integer |
| prf flag | SMF79PRF | Processor flags | string |
| qes | prf | System has expanded storage | |
| cne | prf | Equipped with ESCON channel | |
| drc | prf | ESCON Director in configuration | |
| eme | prf | System in z/ARCH mode | |
| pri | prf | At least one zAAP is currently installed | |
| prp | prf | At least one zIIP is currently installed | |
| ped | prf | Enhanced DAT facility 1 | |
| pe2 | prf | Enhanced DAT facility 2 | |
| ptn | SMF79PTN | PR/SM partition number | string |
| srl | SMF79SRL | SMF record level | integer |
| iet | SMF79IET | Interval expiration time token | date-time |
| lgo | SMF79LGO | Offset GMT to local time | integer |
| rao | SMF79RAO | Offset to reassembly area relative to start of RMF product section | integer |
| ral | SMF79RAL | Length of reassembly area. Area consists of a fixed header and a variable number of information blocks. Length depends on the record type/subtype, but is fixed for a specific type/subtype | integer |
| ran | SMF79RAN | Number of reassembly area. This field is used to indicate whether SMF record is broken. If 0, record is not broken. If 1, record is broken. Offset and length are only valid if SMFxxRAN is 1. Reassembly area is only present in broken records. | integer |
| oil | SMF79OIL | Original interval length as defined in the session or by SMF (in seconds) | integer |
| syn | SMF79SYN | SYNC value in seconds | integer |
| gie | SMF79GIE | Projected gathering interval end GMT time | date-time |
| xnm | SMF79XNM | Sysplex name as defined in ECVTSPLX | string |
| snm | SMF79SNM | System name for current system as defined in CVTSNAME | string |
Common record 79 header
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| r79gtod | R79GTOD | Time when the call to data gatherer was issued | time |
| r79lf2 flag | R79LF2 | Flag byte | string |
| r79par | r79lf2 | Not enough relocate section to complete data gathering | |
| r79sg | r79lf2 | Report sorted by SG | |
| r79rsm | r79lf2 | Invalid RSM data obtained | |
| r79goal | r79lf2 | System is in GOAL mode | |
| r79trxi | r79lf2 | Invalid transaction data | |
| r79srmc | r79lf2 | SRM mode changed | |
| r79inv | r79lf2 | inval. data fr. Mon I (DEV PGSP IOQ) | |
| r79maxd | r79lf2 | Incomplete device data due to too many devices | |
| r79ses | R79SES | Session name | string |
| r79user | R79USER | User field | integer |
| r79rid | R79RID | Measurement name | string |
| r79ctxtl | R79CTXTL | Length of command text | integer |
| r79ctext | R79CTEXT | Command text | string |
| r79dtxtl | R79DTXTL | Length default DR text | integer |
| r79dtext | R79DTEXT | Default DR text | string |
| r79ist | R79IST | Monitor I interval start time | time |
| r79tsr | R79TSR | Total number of small records | integer |
| r79tot | R79TOT | Total number of data sections in large record | integer |
| r79nxt | R79NXT | Number of data sections in following small records | integer |
| r79iwmtk | R79IWMTK | Token returned from IWMRCOLL service | string |
SCALAR RELOCATE SE
| Name | Based on | Description | Type/Format |
|---|---|---|---|
| r793cri | R793CRI | Current System UIC (MCTCurSystemUIC) | integer |
| r793cpuu | R793CPUU | PROCESSOR UTILIZATION (0-101) | integer |
| r793dq | R793DQ | LENGTH OF OUT WAIT QUEUE | integer |
| r793inc | R793INC | NUMBER OF ADDRESS SPACES IN IN STORAGE (SRM IN QUEUE) | integer |
| r793outu | R793OUTU | NUMBER OF ADDRESS SPACES OUT OF STORAGE (SRM OUT QUEUE) | integer |
| r793lout | R793LOUT | NUMBER OF ADDRESS SPACES LOGICALLY SWAPPED OUT | integer |
| r793sqr | R793SQR | SQA pages in real storage CTSQAF + CTRSQAF | integer |
| r793sqe | R793SQE | SQA pages in ext. storage CTTSQAF - CTRSQAF | integer |
| r793lsqr | R793LSQR | LSQA pages in real storage CTLSQAF + CTRLSQAF | integer |
| r793lsqe | R793LSQE | LSQA pages in ext. storage CTTLSQAF - CTRLSQAF | integer |
| r793afc | R793AFC | NUMBER OF AVAILABLE FRAMES | integer |
| r793cut | R793CUT | MVS view of CPU utilization (interval - wait time) if Monitor I CPU gathering is active, otherwise CCVUTILP value at end of interval. (The interval length of the MVS view value is either 5 seconds or the Monitor I cycle time, if it is larger than 5 seconds.) | integer |
| r793sqa4 | R793SQA4 | NUMBER OF FIXED SQA FRAMES (replaces R793SQA) | integer |
| r793cmn4 | R793CMN4 | NUMBER OF COMMON (LPA+CSA) PAGEABLE AND FIXED FRAMES (replaces R793CMNF) | integer |
| r793cmf4 | R793CMF4 | NUMBER OF COMMON (LPA+CSA) FIXED FRAMES (replaces R793CMFF) | integer |
| r793pfx4 | R793PFX4 | NUMBER OF PRIVATE FIXED FRAMES (LSQA+NON-LSQA) (replaces R793PRFX) | integer |
| r793lpf4 | R793LPF4 | Number of total LPA frames (replaces R793LPAF) | integer |
| r793csf4 | R793CSF4 | Number of total CSA frames including user key common storage allocated in Restricted Use CSA (RUCSA) (replaces R793CSAF) | integer |
| r793lfx4 | R793LFX4 | NUMBER OF LPA FIXED FRAMES (replaces R793LPFX) | integer |
| r793cfx4 | R793CFX4 | Number of CSA fixed frames including user key common storage allocated in RUCSA (replaces R793CSFX) | integer |
| r793lsq4 | R793LSQ4 | NUMBER OF FIXED LSQA FRAMES (replaces R793LSQA) | integer |
| r793nlf4 | R793NLF4 | NUMBER OF PRIVATE NON-LSQA FIXED FRAMES (replaces R793NLQF) | integer |