CopyObjectRequest.Builder (IBM COS Java SDK

All Superinterfaces:

AwsRequest.Builder, Buildable, CopyableBuilder<CopyObjectRequest.Builder,CopyObjectRequest>, S3Request.Builder, SdkBuilder<CopyObjectRequest.Builder,CopyObjectRequest>, SdkPojo, SdkRequest.Builder

Enclosing class:

CopyObjectRequest
```
@Mutable
 @NotThreadSafe
public static interface CopyObjectRequest.Builder
extends S3Request.Builder, SdkPojo, CopyableBuilder<CopyObjectRequest.Builder,CopyObjectRequest>
```

Method Summary

All Methods Instance Methods Abstract Methods Deprecated Methods
Modifier and Type	Method and Description
`CopyObjectRequest.Builder`	`acl(ObjectCannedACL acl)` The canned access control list (ACL) to apply to the object.
`CopyObjectRequest.Builder`	`acl(String acl)` The canned access control list (ACL) to apply to the object.
`CopyObjectRequest.Builder`	`bucket(String destinationBucket)` Deprecated. Use `destinationBucket(String)`
`CopyObjectRequest.Builder`	`bucketKeyEnabled(Boolean bucketKeyEnabled)` Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS).
`CopyObjectRequest.Builder`	`cacheControl(String cacheControl)` Specifies the caching behavior along the request/reply chain.
`CopyObjectRequest.Builder`	`checksumAlgorithm(ChecksumAlgorithm checksumAlgorithm)` Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object.
`CopyObjectRequest.Builder`	`checksumAlgorithm(String checksumAlgorithm)` Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object.
`CopyObjectRequest.Builder`	`contentDisposition(String contentDisposition)` Specifies presentational information for the object.
`CopyObjectRequest.Builder`	`contentEncoding(String contentEncoding)` Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
`CopyObjectRequest.Builder`	`contentLanguage(String contentLanguage)` The language the content is in.
`CopyObjectRequest.Builder`	`contentType(String contentType)` A standard MIME type that describes the format of the object data.
`CopyObjectRequest.Builder`	`copySource(String copySource)` Deprecated. The `copySource` parameter has been deprecated in favor of the more user-friendly `sourceBucket`, `sourceKey`, and `sourceVersionId` parameters. The `copySource` parameter will remain fully functional, but it must not be used in conjunction with its replacement parameters.
`CopyObjectRequest.Builder`	`copySourceIfMatch(String copySourceIfMatch)` Copies the object if its entity tag (ETag) matches the specified tag.
`CopyObjectRequest.Builder`	`copySourceIfModifiedSince(Instant copySourceIfModifiedSince)` Copies the object if it has been modified since the specified time.
`CopyObjectRequest.Builder`	`copySourceIfNoneMatch(String copySourceIfNoneMatch)` Copies the object if its entity tag (ETag) is different than the specified ETag.
`CopyObjectRequest.Builder`	`copySourceIfUnmodifiedSince(Instant copySourceIfUnmodifiedSince)` Copies the object if it hasn't been modified since the specified time.
`CopyObjectRequest.Builder`	`copySourceSSECustomerAlgorithm(String copySourceSSECustomerAlgorithm)` Specifies the algorithm to use when decrypting the source object (for example, `AES256`).
`CopyObjectRequest.Builder`	`copySourceSSECustomerKey(String copySourceSSECustomerKey)` Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object.
`CopyObjectRequest.Builder`	`copySourceSSECustomerKeyMD5(String copySourceSSECustomerKeyMD5)` Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
`CopyObjectRequest.Builder`	`destinationBucket(String destinationBucket)` The name of the destination bucket.
`CopyObjectRequest.Builder`	`destinationKey(String destinationKey)` The key of the destination object.
`CopyObjectRequest.Builder`	`expectedBucketOwner(String expectedBucketOwner)` The account ID of the expected destination bucket owner.
`CopyObjectRequest.Builder`	`expectedSourceBucketOwner(String expectedSourceBucketOwner)` The account ID of the expected source bucket owner.
`CopyObjectRequest.Builder`	`expires(Instant expires)` The date and time at which the object is no longer cacheable.
`CopyObjectRequest.Builder`	`grantFullControl(String grantFullControl)` Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
`CopyObjectRequest.Builder`	`grantRead(String grantRead)` Allows grantee to read the object data and its metadata.
`CopyObjectRequest.Builder`	`grantReadACP(String grantReadACP)` Allows grantee to read the object ACL.
`CopyObjectRequest.Builder`	`grantWriteACP(String grantWriteACP)` Allows grantee to write the ACL for the applicable object.
`CopyObjectRequest.Builder`	`key(String destinationKey)` Deprecated. Use `destinationKey(String)`
`CopyObjectRequest.Builder`	`metadata(Map<String,String> metadata)` A map of metadata to store with the object in S3.
`CopyObjectRequest.Builder`	`metadataDirective(MetadataDirective metadataDirective)` Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request.
`CopyObjectRequest.Builder`	`metadataDirective(String metadataDirective)` Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request.
`CopyObjectRequest.Builder`	`objectLockLegalHoldStatus(ObjectLockLegalHoldStatus objectLockLegalHoldStatus)` Specifies whether you want to apply a legal hold to the object copy.
`CopyObjectRequest.Builder`	`objectLockLegalHoldStatus(String objectLockLegalHoldStatus)` Specifies whether you want to apply a legal hold to the object copy.
`CopyObjectRequest.Builder`	`objectLockMode(ObjectLockMode objectLockMode)` The Object Lock mode that you want to apply to the object copy.
`CopyObjectRequest.Builder`	`objectLockMode(String objectLockMode)` The Object Lock mode that you want to apply to the object copy.
`CopyObjectRequest.Builder`	`objectLockRetainUntilDate(Instant objectLockRetainUntilDate)` The date and time when you want the Object Lock of the object copy to expire.
`CopyObjectRequest.Builder`	`overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)` Add an optional request override configuration.
`CopyObjectRequest.Builder`	`overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)` Add an optional request override configuration.
`CopyObjectRequest.Builder`	`requestPayer(RequestPayer requestPayer)` Sets the value of the RequestPayer property for this object.
`CopyObjectRequest.Builder`	`requestPayer(String requestPayer)` Sets the value of the RequestPayer property for this object.
`CopyObjectRequest.Builder`	`retentionDirective(RetentionDirective retentionDirective)` Controls how the Protection state of the source object is copied to the destination object.
`CopyObjectRequest.Builder`	`retentionExpirationDate(Instant retentionExpirationDate)`
`CopyObjectRequest.Builder`	`retentionLegalHoldId(String retentionLegalHoldId)`
`CopyObjectRequest.Builder`	`retentionPeriod(Long retentionPeriod)`
`CopyObjectRequest.Builder`	`serverSideEncryption(ServerSideEncryption serverSideEncryption)` The server-side encryption algorithm used when storing this object in Amazon S3.
`CopyObjectRequest.Builder`	`serverSideEncryption(String serverSideEncryption)` The server-side encryption algorithm used when storing this object in Amazon S3.
`CopyObjectRequest.Builder`	`sourceBucket(String sourceBucket)` The name of the bucket containing the object to copy.
`CopyObjectRequest.Builder`	`sourceKey(String sourceKey)` The key of the object to copy.
`CopyObjectRequest.Builder`	`sourceVersionId(String sourceVersionId)` Specifies a particular version of the source object to copy.
`CopyObjectRequest.Builder`	`sseCustomerAlgorithm(String sseCustomerAlgorithm)` Specifies the algorithm to use when encrypting the object (for example, `AES256`).
`CopyObjectRequest.Builder`	`sseCustomerKey(String sseCustomerKey)` Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data.
`CopyObjectRequest.Builder`	`sseCustomerKeyMD5(String sseCustomerKeyMD5)` Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321.
`CopyObjectRequest.Builder`	`ssekmsEncryptionContext(String ssekmsEncryptionContext)` Specifies the Amazon Web Services KMS Encryption Context as an additional encryption context to use for the destination object encryption.
`CopyObjectRequest.Builder`	`ssekmsKeyId(String ssekmsKeyId)` Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption.
`CopyObjectRequest.Builder`	`storageClass(StorageClass storageClass)` If the `x-amz-storage-class` header is not used, the copied object will be stored in the `STANDARD` Storage Class by default.
`CopyObjectRequest.Builder`	`storageClass(String storageClass)` If the `x-amz-storage-class` header is not used, the copied object will be stored in the `STANDARD` Storage Class by default.
`CopyObjectRequest.Builder`	`tagging(String tagging)` The tag-set for the object copy in the destination bucket.
`CopyObjectRequest.Builder`	`tagging(Tagging tagging)`
`CopyObjectRequest.Builder`	`taggingDirective(String taggingDirective)` Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
`CopyObjectRequest.Builder`	`taggingDirective(TaggingDirective taggingDirective)` Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
`CopyObjectRequest.Builder`	`websiteRedirectLocation(String websiteRedirectLocation)` If the destination bucket is configured as a website, redirects requests for this object copy to another object in the same bucket or to an external URL.

Methods inherited from interface com.ibm.cos.v2.services.s3.model.S3Request.Builder
build

Methods inherited from interface com.ibm.cos.v2.awscore.AwsRequest.Builder
overrideConfiguration

Methods inherited from interface com.ibm.cos.v2.core.SdkPojo
equalsBySdkFields, sdkFieldNameToField, sdkFields

Methods inherited from interface com.ibm.cos.v2.utils.builder.CopyableBuilder
copy

Methods inherited from interface com.ibm.cos.v2.utils.builder.SdkBuilder
applyMutation, build

- Method Detail
  - acl
```
CopyObjectRequest.Builder acl(String acl)
```
    The canned access control list (ACL) to apply to the object.
    
    When you copy an object, the ACL metadata is not preserved and is set to private by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see Using ACLs.
    
    If the destination bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.
    If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Parameters:
    acl - The canned access control list (ACL) to apply to the object.
    
    When you copy an object, the ACL metadata is not preserved and is set to private by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see Using ACLs.
    
    If the destination bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.
    
    If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ObjectCannedACL, ObjectCannedACL
  - acl
```
CopyObjectRequest.Builder acl(ObjectCannedACL acl)
```
    The canned access control list (ACL) to apply to the object.
    
    When you copy an object, the ACL metadata is not preserved and is set to private by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see Using ACLs.
    
    If the destination bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.
    If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Parameters:
    acl - The canned access control list (ACL) to apply to the object.
    
    When you copy an object, the ACL metadata is not preserved and is set to private by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see Using ACLs.
    
    If the destination bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.
    
    If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ObjectCannedACL, ObjectCannedACL
  - cacheControl
```
CopyObjectRequest.Builder cacheControl(String cacheControl)
```
    Specifies the caching behavior along the request/reply chain.
    
    Parameters:
    
    cacheControl - Specifies the caching behavior along the request/reply chain.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - checksumAlgorithm
```
CopyObjectRequest.Builder checksumAlgorithm(String checksumAlgorithm)
```
    Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
    
    When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the CopyObject request does not include this x-amz-checksum-algorithm header, the checksum algorithm will be copied from the source object to the destination object (if it's present on the source object). You can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header. Unrecognized or unsupported values will respond with the HTTP status code 400 Bad Request.
    
    For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance.
    
    Parameters:
    
    checksumAlgorithm - Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
    
    When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the CopyObject request does not include this x-amz-checksum-algorithm header, the checksum algorithm will be copied from the source object to the destination object (if it's present on the source object). You can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header. Unrecognized or unsupported values will respond with the HTTP status code 400 Bad Request .
    
    For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ChecksumAlgorithm, ChecksumAlgorithm
  - checksumAlgorithm
```
CopyObjectRequest.Builder checksumAlgorithm(ChecksumAlgorithm checksumAlgorithm)
```
    Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
    
    When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the CopyObject request does not include this x-amz-checksum-algorithm header, the checksum algorithm will be copied from the source object to the destination object (if it's present on the source object). You can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header. Unrecognized or unsupported values will respond with the HTTP status code 400 Bad Request.
    
    For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance.
    
    Parameters:
    
    checksumAlgorithm - Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
    
    When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the CopyObject request does not include this x-amz-checksum-algorithm header, the checksum algorithm will be copied from the source object to the destination object (if it's present on the source object). You can optionally specify a different checksum algorithm to use with the x-amz-checksum-algorithm header. Unrecognized or unsupported values will respond with the HTTP status code 400 Bad Request .
    
    For directory buckets, when you use Amazon Web Services SDKs, CRC32 is the default checksum algorithm that's used for performance.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ChecksumAlgorithm, ChecksumAlgorithm
  - contentDisposition
```
CopyObjectRequest.Builder contentDisposition(String contentDisposition)
```
    Specifies presentational information for the object. Indicates whether an object should be displayed in a web browser or downloaded as a file. It allows specifying the desired filename for the downloaded file.
    
    Parameters:
    
    contentDisposition - Specifies presentational information for the object. Indicates whether an object should be displayed in a web browser or downloaded as a file. It allows specifying the desired filename for the downloaded file.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - contentEncoding
```
CopyObjectRequest.Builder contentEncoding(String contentEncoding)
```
    Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
    
    For directory buckets, only the aws-chunked value is supported in this header field.
    
    Parameters:
    
    contentEncoding - Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
    
    For directory buckets, only the aws-chunked value is supported in this header field.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - contentLanguage
```
CopyObjectRequest.Builder contentLanguage(String contentLanguage)
```
    The language the content is in.
    
    Parameters:
    
    contentLanguage - The language the content is in.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - contentType
```
CopyObjectRequest.Builder contentType(String contentType)
```
    A standard MIME type that describes the format of the object data.
    
    Parameters:
    
    contentType - A standard MIME type that describes the format of the object data.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySource
```
@Deprecated
CopyObjectRequest.Builder copySource(String copySource)
```
    Deprecated. The copySource parameter has been deprecated in favor of the more user-friendly sourceBucket, sourceKey, and sourceVersionId parameters. The copySource parameter will remain fully functional, but it must not be used in conjunction with its replacement parameters.
    Specifies the source object for the copy operation. The source object can be up to 5 GB. If the source object is an object that was uploaded by using a multipart upload, the object copy will be a single part object after the source object is copied to the destination bucket.
    
    You specify the value of the copy source in one of two formats, depending on whether you want to access the source object through an access point:
    - For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object reports/january.pdf from the general purpose bucket awsexamplebucket, use awsexamplebucket/reports/january.pdf. The value must be URL-encoded. To copy the object reports/january.pdf from the directory bucket awsexamplebucket--use1-az5--x-s3, use awsexamplebucket--use1-az5--x-s3/reports/january.pdf. The value must be URL-encoded.
    - For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format arn:aws:s3:<Region>:<account-id>:accesspoint/<access-point-name>/object/<key> . For example, to copy the object reports/january.pdf through access point my-access-point owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf. The value must be URL encoded.
      
      Amazon S3 supports copy operations using Access points only when the source and destination buckets are in the same Amazon Web Services Region.
      
      Access points are not supported by directory buckets.
      
      Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format arn:aws:s3-outposts:<Region>:<account-id>:outpost/<outpost-id>/object/<key> . For example, to copy the object reports/january.pdf through outpost my-outpost owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf. The value must be URL-encoded.
    If your source bucket versioning is enabled, the x-amz-copy-source header by default identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId query parameter. Specifically, append ?versionId=<version-id> to the value (for example, awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.
    
    If you enable versioning on the destination bucket, Amazon S3 generates a unique version ID for the copied object. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response.
    
    If you do not enable versioning or suspend it on the destination bucket, the version ID that Amazon S3 generates in the x-amz-version-id response header is always null.
    
    Directory buckets - S3 Versioning isn't enabled and supported for directory buckets.
    Parameters:
    copySource - Specifies the source object for the copy operation. The source object can be up to 5 GB. If the source object is an object that was uploaded by using a multipart upload, the object copy will be a single part object after the source object is copied to the destination bucket.
    
    You specify the value of the copy source in one of two formats, depending on whether you want to access the source object through an access point:
    
    For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object reports/january.pdf from the general purpose bucket awsexamplebucket, use awsexamplebucket/reports/january.pdf. The value must be URL-encoded. To copy the object reports/january.pdf from the directory bucket awsexamplebucket--use1-az5--x-s3, use awsexamplebucket--use1-az5--x-s3/reports/january.pdf. The value must be URL-encoded.
    
    For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format arn:aws:s3:<Region>:<account-id>:accesspoint/<access-point-name>/object/<key> . For example, to copy the object reports/january.pdf through access point my-access-point owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf. The value must be URL encoded.
    
    Amazon S3 supports copy operations using Access points only when the source and destination buckets are in the same Amazon Web Services Region.
    
    Access points are not supported by directory buckets.
    
    Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format arn:aws:s3-outposts:<Region>:<account-id>:outpost/<outpost-id>/object/<key> . For example, to copy the object reports/january.pdf through outpost my-outpost owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf. The value must be URL-encoded.
    
    If your source bucket versioning is enabled, the x-amz-copy-source header by default identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId query parameter. Specifically, append ?versionId=<version-id> to the value (for example, awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.
    
    If you enable versioning on the destination bucket, Amazon S3 generates a unique version ID for the copied object. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response.
    
    If you do not enable versioning or suspend it on the destination bucket, the version ID that Amazon S3 generates in the x-amz-version-id response header is always null.
    
    Directory buckets - S3 Versioning isn't enabled and supported for directory buckets.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceIfMatch
```
CopyObjectRequest.Builder copySourceIfMatch(String copySourceIfMatch)
```
    Copies the object if its entity tag (ETag) matches the specified tag.
    
    If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
    - x-amz-copy-source-if-match condition evaluates to true
    - x-amz-copy-source-if-unmodified-since condition evaluates to false
    Parameters:
    copySourceIfMatch - Copies the object if its entity tag (ETag) matches the specified tag.
    
    If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
    
    x-amz-copy-source-if-match condition evaluates to true
    
    x-amz-copy-source-if-unmodified-since condition evaluates to false
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceIfModifiedSince
```
CopyObjectRequest.Builder copySourceIfModifiedSince(Instant copySourceIfModifiedSince)
```
    Copies the object if it has been modified since the specified time.
    
    If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
    - x-amz-copy-source-if-none-match condition evaluates to false
    - x-amz-copy-source-if-modified-since condition evaluates to true
    Parameters:
    copySourceIfModifiedSince - Copies the object if it has been modified since the specified time.
    
    If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
    
    x-amz-copy-source-if-none-match condition evaluates to false
    
    x-amz-copy-source-if-modified-since condition evaluates to true
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceIfNoneMatch
```
CopyObjectRequest.Builder copySourceIfNoneMatch(String copySourceIfNoneMatch)
```
    Copies the object if its entity tag (ETag) is different than the specified ETag.
    
    If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
    - x-amz-copy-source-if-none-match condition evaluates to false
    - x-amz-copy-source-if-modified-since condition evaluates to true
    Parameters:
    copySourceIfNoneMatch - Copies the object if its entity tag (ETag) is different than the specified ETag.
    
    If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
    
    x-amz-copy-source-if-none-match condition evaluates to false
    
    x-amz-copy-source-if-modified-since condition evaluates to true
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceIfUnmodifiedSince
```
CopyObjectRequest.Builder copySourceIfUnmodifiedSince(Instant copySourceIfUnmodifiedSince)
```
    Copies the object if it hasn't been modified since the specified time.
    
    If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
    - x-amz-copy-source-if-match condition evaluates to true
    - x-amz-copy-source-if-unmodified-since condition evaluates to false
    Parameters:
    copySourceIfUnmodifiedSince - Copies the object if it hasn't been modified since the specified time.
    
    If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
    
    x-amz-copy-source-if-match condition evaluates to true
    
    x-amz-copy-source-if-unmodified-since condition evaluates to false
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - expires
```
CopyObjectRequest.Builder expires(Instant expires)
```
    The date and time at which the object is no longer cacheable.
    
    Parameters:
    
    expires - The date and time at which the object is no longer cacheable.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - grantFullControl
```
CopyObjectRequest.Builder grantFullControl(String grantFullControl)
```
    Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Parameters:
    grantFullControl - Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - grantRead
```
CopyObjectRequest.Builder grantRead(String grantRead)
```
    Allows grantee to read the object data and its metadata.
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Parameters:
    grantRead - Allows grantee to read the object data and its metadata.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - grantReadACP
```
CopyObjectRequest.Builder grantReadACP(String grantReadACP)
```
    Allows grantee to read the object ACL.
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Parameters:
    grantReadACP - Allows grantee to read the object ACL.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - grantWriteACP
```
CopyObjectRequest.Builder grantWriteACP(String grantWriteACP)
```
    Allows grantee to write the ACL for the applicable object.
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Parameters:
    grantWriteACP - Allows grantee to write the ACL for the applicable object.
    
    This functionality is not supported for directory buckets.
    
    This functionality is not supported for Amazon S3 on Outposts.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - metadata
```
CopyObjectRequest.Builder metadata(Map<String,String> metadata)
```
    A map of metadata to store with the object in S3.
    
    Parameters:
    
    metadata - A map of metadata to store with the object in S3.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - metadataDirective
```
CopyObjectRequest.Builder metadataDirective(String metadataDirective)
```
    Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request. When copying an object, you can preserve all metadata (the default) or specify new metadata. If this header isn’t specified, COPY is the default behavior.
    
    General purpose bucket - For general purpose buckets, when you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Amazon S3 condition key examples in the Amazon S3 User Guide.
    
    x-amz-website-redirect-location is unique to each object and is not copied when using the x-amz-metadata-directive header. To copy the value, you must specify x-amz-website-redirect-location in the request header.
    
    Parameters:
    
    metadataDirective - Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request. When copying an object, you can preserve all metadata (the default) or specify new metadata. If this header isn’t specified, COPY is the default behavior.
    
    General purpose bucket - For general purpose buckets, when you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Amazon S3 condition key examples in the Amazon S3 User Guide.
    
    x-amz-website-redirect-location is unique to each object and is not copied when using the x-amz-metadata-directive header. To copy the value, you must specify x-amz-website-redirect-location in the request header.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    MetadataDirective, MetadataDirective
  - metadataDirective
```
CopyObjectRequest.Builder metadataDirective(MetadataDirective metadataDirective)
```
    Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request. When copying an object, you can preserve all metadata (the default) or specify new metadata. If this header isn’t specified, COPY is the default behavior.
    
    General purpose bucket - For general purpose buckets, when you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Amazon S3 condition key examples in the Amazon S3 User Guide.
    
    x-amz-website-redirect-location is unique to each object and is not copied when using the x-amz-metadata-directive header. To copy the value, you must specify x-amz-website-redirect-location in the request header.
    
    Parameters:
    
    metadataDirective - Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request. When copying an object, you can preserve all metadata (the default) or specify new metadata. If this header isn’t specified, COPY is the default behavior.
    
    General purpose bucket - For general purpose buckets, when you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Amazon S3 condition key examples in the Amazon S3 User Guide.
    
    x-amz-website-redirect-location is unique to each object and is not copied when using the x-amz-metadata-directive header. To copy the value, you must specify x-amz-website-redirect-location in the request header.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    MetadataDirective, MetadataDirective
  - taggingDirective
```
CopyObjectRequest.Builder taggingDirective(String taggingDirective)
```
    Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
    
    The default value is COPY.
    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:
    
    When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.
    
    When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.
    
    When you don't set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.
    
    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:
    
    When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and don't set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.
    Parameters:
    taggingDirective - Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
    
    The default value is COPY.
    
    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:
    
    When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.
    
    When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.
    
    When you don't set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.
    
    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:
    
    When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and don't set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    TaggingDirective, TaggingDirective
  - taggingDirective
```
CopyObjectRequest.Builder taggingDirective(TaggingDirective taggingDirective)
```
    Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
    
    The default value is COPY.
    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:
    
    When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.
    
    When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.
    
    When you don't set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.
    
    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:
    
    When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and don't set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.
    Parameters:
    taggingDirective - Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
    
    The default value is COPY.
    
    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:
    
    When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.
    
    When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.
    
    When you don't set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.
    
    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:
    
    When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and don't set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    TaggingDirective, TaggingDirective
  - serverSideEncryption
```
CopyObjectRequest.Builder serverSideEncryption(String serverSideEncryption)
```
    The server-side encryption algorithm used when storing this object in Amazon S3. Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.
    
    Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a different default encryption configuration, Amazon S3 uses the corresponding encryption key to encrypt the target object copy.
    
    With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.
    
    General purpose buckets
    - For general purpose buckets, there are the following supported options for server-side encryption: server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), and server-side encryption with customer-provided encryption keys (SSE-C). Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.
    - When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.
    Directory buckets
    - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.
    - To encrypt new object copies to a directory bucket with SSE-KMS, we recommend you specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you perform a CopyObject operation and want to specify server-side encryption settings for new object copies with SSE-KMS in the encryption-related request headers, you must ensure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.
    Parameters:
    serverSideEncryption - The server-side encryption algorithm used when storing this object in Amazon S3. Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.
    
    Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a different default encryption configuration, Amazon S3 uses the corresponding encryption key to encrypt the target object copy.
    
    With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.
    
    General purpose buckets
    
    For general purpose buckets, there are the following supported options for server-side encryption: server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), and server-side encryption with customer-provided encryption keys (SSE-C). Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.
    
    When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.
    
    Directory buckets
    
    For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.
    
    To encrypt new object copies to a directory bucket with SSE-KMS, we recommend you specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you perform a CopyObject operation and want to specify server-side encryption settings for new object copies with SSE-KMS in the encryption-related request headers, you must ensure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ServerSideEncryption, ServerSideEncryption
  - serverSideEncryption
```
CopyObjectRequest.Builder serverSideEncryption(ServerSideEncryption serverSideEncryption)
```
    The server-side encryption algorithm used when storing this object in Amazon S3. Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.
    
    Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a different default encryption configuration, Amazon S3 uses the corresponding encryption key to encrypt the target object copy.
    
    With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.
    
    General purpose buckets
    - For general purpose buckets, there are the following supported options for server-side encryption: server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), and server-side encryption with customer-provided encryption keys (SSE-C). Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.
    - When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.
    Directory buckets
    - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.
    - To encrypt new object copies to a directory bucket with SSE-KMS, we recommend you specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you perform a CopyObject operation and want to specify server-side encryption settings for new object copies with SSE-KMS in the encryption-related request headers, you must ensure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.
    Parameters:
    serverSideEncryption - The server-side encryption algorithm used when storing this object in Amazon S3. Unrecognized or unsupported values won’t write a destination object and will receive a 400 Bad Request response.
    
    Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a different default encryption configuration, Amazon S3 uses the corresponding encryption key to encrypt the target object copy.
    
    With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.
    
    General purpose buckets
    
    For general purpose buckets, there are the following supported options for server-side encryption: server-side encryption with Key Management Service (KMS) keys (SSE-KMS), dual-layer server-side encryption with Amazon Web Services KMS keys (DSSE-KMS), and server-side encryption with customer-provided encryption keys (SSE-C). Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.
    
    When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.
    
    Directory buckets
    
    For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (AES256) and server-side encryption with KMS keys (SSE-KMS) (aws:kms). We recommend that the bucket's default encryption uses the desired encryption configuration and you don't override the bucket default encryption in your CreateSession requests or PUT object requests. Then, new objects are automatically encrypted with the desired encryption settings. For more information, see Protecting data with server-side encryption in the Amazon S3 User Guide. For more information about the encryption overriding behaviors in directory buckets, see Specifying server-side encryption with KMS for new object uploads.
    
    To encrypt new object copies to a directory bucket with SSE-KMS, we recommend you specify SSE-KMS as the directory bucket's default encryption configuration with a KMS key (specifically, a customer managed key). The Amazon Web Services managed key (aws/s3) isn't supported. Your SSE-KMS configuration can only support 1 customer managed key per directory bucket for the lifetime of the bucket. After you specify a customer managed key for SSE-KMS, you can't override the customer managed key for the bucket's SSE-KMS configuration. Then, when you perform a CopyObject operation and want to specify server-side encryption settings for new object copies with SSE-KMS in the encryption-related request headers, you must ensure the encryption key is the same customer managed key that you specified for the directory bucket's default encryption configuration.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ServerSideEncryption, ServerSideEncryption
  - storageClass
```
CopyObjectRequest.Builder storageClass(String storageClass)
```
    If the x-amz-storage-class header is not used, the copied object will be stored in the STANDARD Storage Class by default. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class.
    Directory buckets - Directory buckets only support EXPRESS_ONEZONE (the S3 Express One Zone storage class) in Availability Zones and ONEZONE_IA (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.
    
    Amazon S3 on Outposts - S3 on Outposts only uses the OUTPOSTS Storage Class.
    You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the x-amz-storage-class header. For more information, see Storage Classes in the Amazon S3 User Guide.
    
    Before using an object as a source object for the copy operation, you must restore a copy of it if it meets any of the following conditions:
    - The storage class of the source object is GLACIER or DEEP_ARCHIVE.
    - The storage class of the source object is INTELLIGENT_TIERING and it's S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access.
    For more information, see RestoreObject and Copying Objects in the Amazon S3 User Guide.
    Parameters:
    storageClass - If the x-amz-storage-class header is not used, the copied object will be stored in the STANDARD Storage Class by default. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class.
    
    Directory buckets - Directory buckets only support EXPRESS_ONEZONE (the S3 Express One Zone storage class) in Availability Zones and ONEZONE_IA (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.
    
    Amazon S3 on Outposts - S3 on Outposts only uses the OUTPOSTS Storage Class.
    
    You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the x-amz-storage-class header. For more information, see Storage Classes in the Amazon S3 User Guide.
    
    Before using an object as a source object for the copy operation, you must restore a copy of it if it meets any of the following conditions:
    
    The storage class of the source object is GLACIER or DEEP_ARCHIVE.
    
    The storage class of the source object is INTELLIGENT_TIERING and it's S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access.
    
    For more information, see RestoreObject and Copying Objects in the Amazon S3 User Guide.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    StorageClass, StorageClass
  - storageClass
```
CopyObjectRequest.Builder storageClass(StorageClass storageClass)
```
    If the x-amz-storage-class header is not used, the copied object will be stored in the STANDARD Storage Class by default. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class.
    Directory buckets - Directory buckets only support EXPRESS_ONEZONE (the S3 Express One Zone storage class) in Availability Zones and ONEZONE_IA (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.
    
    Amazon S3 on Outposts - S3 on Outposts only uses the OUTPOSTS Storage Class.
    You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the x-amz-storage-class header. For more information, see Storage Classes in the Amazon S3 User Guide.
    
    Before using an object as a source object for the copy operation, you must restore a copy of it if it meets any of the following conditions:
    - The storage class of the source object is GLACIER or DEEP_ARCHIVE.
    - The storage class of the source object is INTELLIGENT_TIERING and it's S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access.
    For more information, see RestoreObject and Copying Objects in the Amazon S3 User Guide.
    Parameters:
    storageClass - If the x-amz-storage-class header is not used, the copied object will be stored in the STANDARD Storage Class by default. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class.
    
    Directory buckets - Directory buckets only support EXPRESS_ONEZONE (the S3 Express One Zone storage class) in Availability Zones and ONEZONE_IA (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones. Unsupported storage class values won't write a destination object and will respond with the HTTP status code 400 Bad Request.
    
    Amazon S3 on Outposts - S3 on Outposts only uses the OUTPOSTS Storage Class.
    
    You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 by using the x-amz-storage-class header. For more information, see Storage Classes in the Amazon S3 User Guide.
    
    Before using an object as a source object for the copy operation, you must restore a copy of it if it meets any of the following conditions:
    
    The storage class of the source object is GLACIER or DEEP_ARCHIVE.
    
    The storage class of the source object is INTELLIGENT_TIERING and it's S3 Intelligent-Tiering access tier is Archive Access or Deep Archive Access.
    
    For more information, see RestoreObject and Copying Objects in the Amazon S3 User Guide.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    StorageClass, StorageClass
  - websiteRedirectLocation
```
CopyObjectRequest.Builder websiteRedirectLocation(String websiteRedirectLocation)
```
    If the destination bucket is configured as a website, redirects requests for this object copy to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. This value is unique to each object and is not copied when using the x-amz-metadata-directive header. Instead, you may opt to provide this header in combination with the x-amz-metadata-directive header.
    
    This functionality is not supported for directory buckets.
    
    Parameters:
    
    websiteRedirectLocation - If the destination bucket is configured as a website, redirects requests for this object copy to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. This value is unique to each object and is not copied when using the x-amz-metadata-directive header. Instead, you may opt to provide this header in combination with the x-amz-metadata-directive header.
    
    This functionality is not supported for directory buckets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - sseCustomerAlgorithm
```
CopyObjectRequest.Builder sseCustomerAlgorithm(String sseCustomerAlgorithm)
```
    Specifies the algorithm to use when encrypting the object (for example, AES256).
    
    When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.
    
    This functionality is not supported when the destination bucket is a directory bucket.
    
    Parameters:
    
    sseCustomerAlgorithm - Specifies the algorithm to use when encrypting the object (for example, AES256).
    
    When you perform a CopyObject operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.
    
    This functionality is not supported when the destination bucket is a directory bucket.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - sseCustomerKey
```
CopyObjectRequest.Builder sseCustomerKey(String sseCustomerKey)
```
    Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded. Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
    
    This functionality is not supported when the destination bucket is a directory bucket.
    
    Parameters:
    
    sseCustomerKey - Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded. Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
    
    This functionality is not supported when the destination bucket is a directory bucket.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - sseCustomerKeyMD5
```
CopyObjectRequest.Builder sseCustomerKeyMD5(String sseCustomerKeyMD5)
```
    Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
    
    This functionality is not supported when the destination bucket is a directory bucket.
    
    Parameters:
    
    sseCustomerKeyMD5 - Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
    
    This functionality is not supported when the destination bucket is a directory bucket.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - ssekmsKeyId
```
CopyObjectRequest.Builder ssekmsKeyId(String ssekmsKeyId)
```
    Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
    
    Directory buckets - To encrypt data using SSE-KMS, it's recommended to specify the x-amz-server-side-encryption header to aws:kms. Then, the x-amz-server-side-encryption-aws-kms-key-id header implicitly uses the bucket's default KMS customer managed key ID. If you want to explicitly set the x-amz-server-side-encryption-aws-kms-key-id header, it must match the bucket's default customer managed key (using key ID or ARN, not alias). Your SSE-KMS configuration can only support 1 customer managed key per directory bucket's lifetime. The Amazon Web Services managed key (aws/s3) isn't supported. Incorrect key specification results in an HTTP 400 Bad Request error.
    
    Parameters:
    
    ssekmsKeyId - Specifies the KMS key ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
    
    Directory buckets - To encrypt data using SSE-KMS, it's recommended to specify the x-amz-server-side-encryption header to aws:kms. Then, the x-amz-server-side-encryption-aws-kms-key-id header implicitly uses the bucket's default KMS customer managed key ID. If you want to explicitly set the x-amz-server-side-encryption-aws-kms-key-id header, it must match the bucket's default customer managed key (using key ID or ARN, not alias). Your SSE-KMS configuration can only support 1 customer managed key per directory bucket's lifetime. The Amazon Web Services managed key (aws/s3) isn't supported. Incorrect key specification results in an HTTP 400 Bad Request error.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - ssekmsEncryptionContext
```
CopyObjectRequest.Builder ssekmsEncryptionContext(String ssekmsEncryptionContext)
```
    Specifies the Amazon Web Services KMS Encryption Context as an additional encryption context to use for the destination object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
    
    General purpose buckets - This value must be explicitly added to specify encryption context for CopyObject requests if you want an additional encryption context for your destination object. The additional encryption context of the source object won't be copied to the destination object. For more information, see Encryption context in the Amazon S3 User Guide.
    
    Directory buckets - You can optionally provide an explicit encryption context value. The value must match the default encryption context - the bucket Amazon Resource Name (ARN). An additional encryption context value is not supported.
    
    Parameters:
    
    ssekmsEncryptionContext - Specifies the Amazon Web Services KMS Encryption Context as an additional encryption context to use for the destination object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
    
    General purpose buckets - This value must be explicitly added to specify encryption context for CopyObject requests if you want an additional encryption context for your destination object. The additional encryption context of the source object won't be copied to the destination object. For more information, see Encryption context in the Amazon S3 User Guide.
    
    Directory buckets - You can optionally provide an explicit encryption context value. The value must match the default encryption context - the bucket Amazon Resource Name (ARN). An additional encryption context value is not supported.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - bucketKeyEnabled
```
CopyObjectRequest.Builder bucketKeyEnabled(Boolean bucketKeyEnabled)
```
    Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object.
    
    Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.
    
    For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
    
    Directory buckets - S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
    
    Parameters:
    
    bucketKeyEnabled - Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object.
    
    Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.
    
    For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
    
    Directory buckets - S3 Bucket Keys aren't supported, when you copy SSE-KMS encrypted objects from general purpose buckets to directory buckets, from directory buckets to general purpose buckets, or between directory buckets, through CopyObject. In this case, Amazon S3 makes a call to KMS every time a copy request is made for a KMS-encrypted object.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceSSECustomerAlgorithm
```
CopyObjectRequest.Builder copySourceSSECustomerAlgorithm(String copySourceSSECustomerAlgorithm)
```
    Specifies the algorithm to use when decrypting the source object (for example, AES256).
    
    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
    
    This functionality is not supported when the source object is in a directory bucket.
    
    Parameters:
    
    copySourceSSECustomerAlgorithm - Specifies the algorithm to use when decrypting the source object (for example, AES256 ).
    
    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
    
    This functionality is not supported when the source object is in a directory bucket.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceSSECustomerKey
```
CopyObjectRequest.Builder copySourceSSECustomerKey(String copySourceSSECustomerKey)
```
    Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be the same one that was used when the source object was created.
    
    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
    
    This functionality is not supported when the source object is in a directory bucket.
    
    Parameters:
    
    copySourceSSECustomerKey - Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be the same one that was used when the source object was created.
    
    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
    
    This functionality is not supported when the source object is in a directory bucket.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - copySourceSSECustomerKeyMD5
```
CopyObjectRequest.Builder copySourceSSECustomerKeyMD5(String copySourceSSECustomerKeyMD5)
```
    Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
    
    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
    
    This functionality is not supported when the source object is in a directory bucket.
    
    Parameters:
    
    copySourceSSECustomerKeyMD5 - Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
    
    If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
    
    This functionality is not supported when the source object is in a directory bucket.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - requestPayer
```
CopyObjectRequest.Builder requestPayer(String requestPayer)
```
    Sets the value of the RequestPayer property for this object.
    
    Parameters:
    
    requestPayer - The new value for the RequestPayer property for this object.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    RequestPayer, RequestPayer
  - requestPayer
```
CopyObjectRequest.Builder requestPayer(RequestPayer requestPayer)
```
    Sets the value of the RequestPayer property for this object.
    
    Parameters:
    
    requestPayer - The new value for the RequestPayer property for this object.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    RequestPayer, RequestPayer
  - tagging
```
CopyObjectRequest.Builder tagging(String tagging)
```
    The tag-set for the object copy in the destination bucket. This value must be used in conjunction with the x-amz-tagging-directive if you choose REPLACE for the x-amz-tagging-directive. If you choose COPY for the x-amz-tagging-directive, you don't need to set the x-amz-tagging header, because the tag-set will be copied from the source object directly. The tag-set must be encoded as URL Query parameters.
    
    The default value is the empty value.
    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:
    
    When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.
    
    When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.
    
    When you don't set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.
    
    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:
    
    When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and don't set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.
    Parameters:
    tagging - The tag-set for the object copy in the destination bucket. This value must be used in conjunction with the x-amz-tagging-directive if you choose REPLACE for the x-amz-tagging-directive. If you choose COPY for the x-amz-tagging-directive, you don't need to set the x-amz-tagging header, because the tag-set will be copied from the source object directly. The tag-set must be encoded as URL Query parameters.
    
    The default value is the empty value.
    
    Directory buckets - For directory buckets in a CopyObject operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a 501 Not Implemented status code. When the destination bucket is a directory bucket, you will receive a 501 Not Implemented response in any of the following situations:
    
    When you attempt to COPY the tag-set from an S3 source object that has non-empty tags.
    
    When you attempt to REPLACE the tag-set of a source object and set a non-empty value to x-amz-tagging.
    
    When you don't set the x-amz-tagging-directive header and the source object has non-empty tags. This is because the default value of x-amz-tagging-directive is COPY.
    
    Because only the empty tag-set is supported for directory buckets in a CopyObject operation, the following situations are allowed:
    
    When you attempt to COPY the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a general purpose bucket source object that has non-empty tags and set the x-amz-tagging value of the directory bucket destination object to empty.
    
    When you attempt to REPLACE the tag-set of a directory bucket source object and don't set the x-amz-tagging value of the directory bucket destination object. This is because the default value of x-amz-tagging is the empty value.
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - tagging
```
CopyObjectRequest.Builder tagging(Tagging tagging)
```
  - objectLockMode
```
CopyObjectRequest.Builder objectLockMode(String objectLockMode)
```
    The Object Lock mode that you want to apply to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Parameters:
    
    objectLockMode - The Object Lock mode that you want to apply to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ObjectLockMode, ObjectLockMode
  - objectLockMode
```
CopyObjectRequest.Builder objectLockMode(ObjectLockMode objectLockMode)
```
    The Object Lock mode that you want to apply to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Parameters:
    
    objectLockMode - The Object Lock mode that you want to apply to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ObjectLockMode, ObjectLockMode
  - objectLockRetainUntilDate
```
CopyObjectRequest.Builder objectLockRetainUntilDate(Instant objectLockRetainUntilDate)
```
    The date and time when you want the Object Lock of the object copy to expire.
    
    This functionality is not supported for directory buckets.
    
    Parameters:
    
    objectLockRetainUntilDate - The date and time when you want the Object Lock of the object copy to expire.
    
    This functionality is not supported for directory buckets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - objectLockLegalHoldStatus
```
CopyObjectRequest.Builder objectLockLegalHoldStatus(String objectLockLegalHoldStatus)
```
    Specifies whether you want to apply a legal hold to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Parameters:
    
    objectLockLegalHoldStatus - Specifies whether you want to apply a legal hold to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ObjectLockLegalHoldStatus, ObjectLockLegalHoldStatus
  - objectLockLegalHoldStatus
```
CopyObjectRequest.Builder objectLockLegalHoldStatus(ObjectLockLegalHoldStatus objectLockLegalHoldStatus)
```
    Specifies whether you want to apply a legal hold to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Parameters:
    
    objectLockLegalHoldStatus - Specifies whether you want to apply a legal hold to the object copy.
    
    This functionality is not supported for directory buckets.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
    
    See Also:
    
    ObjectLockLegalHoldStatus, ObjectLockLegalHoldStatus
  - expectedBucketOwner
```
CopyObjectRequest.Builder expectedBucketOwner(String expectedBucketOwner)
```
    The account ID of the expected destination bucket owner. If the account ID that you provide does not match the actual owner of the destination bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
    
    Parameters:
    
    expectedBucketOwner - The account ID of the expected destination bucket owner. If the account ID that you provide does not match the actual owner of the destination bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - expectedSourceBucketOwner
```
CopyObjectRequest.Builder expectedSourceBucketOwner(String expectedSourceBucketOwner)
```
    The account ID of the expected source bucket owner. If the account ID that you provide does not match the actual owner of the source bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
    
    Parameters:
    
    expectedSourceBucketOwner - The account ID of the expected source bucket owner. If the account ID that you provide does not match the actual owner of the source bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - destinationBucket
```
CopyObjectRequest.Builder destinationBucket(String destinationBucket)
```
    The name of the destination bucket.
    
    Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
    
    Copying objects across different Amazon Web Services Regions isn't supported when the source or destination bucket is in Amazon Web Services Local Zones. The source and destination buckets must have the same parent Amazon Web Services Region. Otherwise, you get an HTTP 400 Bad Request error with the error code InvalidRequest.
    
    Access points - When you use this action with an access point for general purpose buckets, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When you use this action with an access point for directory buckets, you must provide the access point name in place of the bucket name. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
    
    Object Lambda access points are not supported by directory buckets.
    
    S3 on Outposts - When you use this action with S3 on Outposts, you must use the Outpost bucket access point ARN or the access point alias for the destination bucket. You can only copy objects within the same Outpost bucket. It's not supported to copy objects across different Amazon Web Services Outposts, between buckets on the same Outposts, or between Outposts buckets and any other bucket types. For more information about S3 on Outposts, see What is S3 on Outposts? in the S3 on Outposts guide. When you use this action with S3 on Outposts through the REST API, you must direct requests to the S3 on Outposts hostname, in the format AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . The hostname isn't required when you use the Amazon Web Services CLI or SDKs.
    
    Parameters:
    
    destinationBucket - The name of the destination bucket.
    
    Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
    
    Copying objects across different Amazon Web Services Regions isn't supported when the source or destination bucket is in Amazon Web Services Local Zones. The source and destination buckets must have the same parent Amazon Web Services Region. Otherwise, you get an HTTP 400 Bad Request error with the error code InvalidRequest.
    
    Access points - When you use this action with an access point for general purpose buckets, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When you use this action with an access point for directory buckets, you must provide the access point name in place of the bucket name. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
    
    Object Lambda access points are not supported by directory buckets.
    
    S3 on Outposts - When you use this action with S3 on Outposts, you must use the Outpost bucket access point ARN or the access point alias for the destination bucket. You can only copy objects within the same Outpost bucket. It's not supported to copy objects across different Amazon Web Services Outposts, between buckets on the same Outposts, or between Outposts buckets and any other bucket types. For more information about S3 on Outposts, see What is S3 on Outposts? in the S3 on Outposts guide. When you use this action with S3 on Outposts through the REST API, you must direct requests to the S3 on Outposts hostname, in the format AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . The hostname isn't required when you use the Amazon Web Services CLI or SDKs.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - bucket
```
@Deprecated
CopyObjectRequest.Builder bucket(String destinationBucket)
```
    Deprecated. Use destinationBucket(String)
    
    The name of the destination bucket.
    
    Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
    
    Copying objects across different Amazon Web Services Regions isn't supported when the source or destination bucket is in Amazon Web Services Local Zones. The source and destination buckets must have the same parent Amazon Web Services Region. Otherwise, you get an HTTP 400 Bad Request error with the error code InvalidRequest.
    
    Access points - When you use this action with an access point for general purpose buckets, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When you use this action with an access point for directory buckets, you must provide the access point name in place of the bucket name. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
    
    Object Lambda access points are not supported by directory buckets.
    
    S3 on Outposts - When you use this action with S3 on Outposts, you must use the Outpost bucket access point ARN or the access point alias for the destination bucket. You can only copy objects within the same Outpost bucket. It's not supported to copy objects across different Amazon Web Services Outposts, between buckets on the same Outposts, or between Outposts buckets and any other bucket types. For more information about S3 on Outposts, see What is S3 on Outposts? in the S3 on Outposts guide. When you use this action with S3 on Outposts through the REST API, you must direct requests to the S3 on Outposts hostname, in the format AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . The hostname isn't required when you use the Amazon Web Services CLI or SDKs.
    
    Parameters:
    
    destinationBucket - The name of the destination bucket.
    
    Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket-name.s3express-zone-id.region-code.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Zone (Availability Zone or Local Zone). Bucket names must follow the format bucket-base-name--zone-id--x-s3 (for example, amzn-s3-demo-bucket--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.
    
    Copying objects across different Amazon Web Services Regions isn't supported when the source or destination bucket is in Amazon Web Services Local Zones. The source and destination buckets must have the same parent Amazon Web Services Region. Otherwise, you get an HTTP 400 Bad Request error with the error code InvalidRequest.
    
    Access points - When you use this action with an access point for general purpose buckets, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When you use this action with an access point for directory buckets, you must provide the access point name in place of the bucket name. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
    
    Object Lambda access points are not supported by directory buckets.
    
    S3 on Outposts - When you use this action with S3 on Outposts, you must use the Outpost bucket access point ARN or the access point alias for the destination bucket. You can only copy objects within the same Outpost bucket. It's not supported to copy objects across different Amazon Web Services Outposts, between buckets on the same Outposts, or between Outposts buckets and any other bucket types. For more information about S3 on Outposts, see What is S3 on Outposts? in the S3 on Outposts guide. When you use this action with S3 on Outposts through the REST API, you must direct requests to the S3 on Outposts hostname, in the format AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . The hostname isn't required when you use the Amazon Web Services CLI or SDKs.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - destinationKey
```
CopyObjectRequest.Builder destinationKey(String destinationKey)
```
    The key of the destination object.
    
    Parameters:
    
    destinationKey - The key of the destination object.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - key
```
@Deprecated
CopyObjectRequest.Builder key(String destinationKey)
```
    Deprecated. Use destinationKey(String)
    
    The key of the destination object.
    
    Parameters:
    
    destinationKey - The key of the destination object.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - sourceBucket
```
CopyObjectRequest.Builder sourceBucket(String sourceBucket)
```
    The name of the bucket containing the object to copy. The provided input will be URL encoded. The sourceBucket, sourceKey, and sourceVersionId parameters must not be used in conjunction with the copySource parameter.
    
    Parameters:
    
    sourceBucket - The name of the bucket containing the object to copy. The provided input will be URL encoded. The sourceBucket, sourceKey, and sourceVersionId parameters must not be used in conjunction with the copySource parameter.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - sourceKey
```
CopyObjectRequest.Builder sourceKey(String sourceKey)
```
    The key of the object to copy. The provided input will be URL encoded. The sourceBucket, sourceKey, and sourceVersionId parameters must not be used in conjunction with the copySource parameter.
    
    Parameters:
    
    sourceKey - The key of the object to copy. The provided input will be URL encoded. The sourceBucket, sourceKey, and sourceVersionId parameters must not be used in conjunction with the copySource parameter.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - sourceVersionId
```
CopyObjectRequest.Builder sourceVersionId(String sourceVersionId)
```
    Specifies a particular version of the source object to copy. By default the latest version is copied. The sourceBucket, sourceKey, and sourceVersionId parameters must not be used in conjunction with the copySource parameter.
    
    Parameters:
    
    sourceVersionId - Specifies a particular version of the source object to copy. By default the latest version is copied. The sourceBucket, sourceKey, and sourceVersionId parameters must not be used in conjunction with the copySource parameter.
    
    Returns:
    
    Returns a reference to this object so that method calls can be chained together.
  - overrideConfiguration
```
CopyObjectRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
```
    Description copied from interface: AwsRequest.Builder
    
    Add an optional request override configuration.
    
    Specified by:
    
    overrideConfiguration in interface AwsRequest.Builder
    
    Parameters:
    
    overrideConfiguration - The override configuration.
    
    Returns:
    
    This object for method chaining.
  - overrideConfiguration
```
CopyObjectRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
```
    Description copied from interface: AwsRequest.Builder
    
    Add an optional request override configuration.
    
    Specified by:
    
    overrideConfiguration in interface AwsRequest.Builder
    
    Parameters:
    
    builderConsumer - A Consumer to which an empty AwsRequestOverrideConfiguration.Builder will be given.
    
    Returns:
    
    This object for method chaining.
  - retentionDirective
```
CopyObjectRequest.Builder retentionDirective(RetentionDirective retentionDirective)
```
    Controls how the Protection state of the source object is copied to the destination object. If copied, the retention period and all legal holds are copied onto the new object. The legal hold date's is set to the date of the copy.
    
    Parameters:
    
    retentionDirective - Specifies the Retention Directive
  - retentionExpirationDate
```
CopyObjectRequest.Builder retentionExpirationDate(Instant retentionExpirationDate)
```
  - retentionLegalHoldId
```
CopyObjectRequest.Builder retentionLegalHoldId(String retentionLegalHoldId)
```
  - retentionPeriod
```
CopyObjectRequest.Builder retentionPeriod(Long retentionPeriod)
```

Interface CopyObjectRequest.Builder

Method Summary

Methods inherited from interface com.ibm.cos.v2.services.s3.model.S3Request.Builder

Methods inherited from interface com.ibm.cos.v2.awscore.AwsRequest.Builder

Methods inherited from interface com.ibm.cos.v2.core.SdkPojo

Methods inherited from interface com.ibm.cos.v2.utils.builder.CopyableBuilder

Methods inherited from interface com.ibm.cos.v2.utils.builder.SdkBuilder

Method Detail

acl

acl

cacheControl

checksumAlgorithm

checksumAlgorithm

contentDisposition

contentEncoding

contentLanguage

contentType

copySource

copySourceIfMatch

copySourceIfModifiedSince

copySourceIfNoneMatch

copySourceIfUnmodifiedSince

expires

grantFullControl

grantRead

grantReadACP

grantWriteACP

metadata

metadataDirective

metadataDirective

taggingDirective

taggingDirective

serverSideEncryption

serverSideEncryption

storageClass

storageClass

websiteRedirectLocation

sseCustomerAlgorithm

sseCustomerKey

sseCustomerKeyMD5

ssekmsKeyId

ssekmsEncryptionContext

bucketKeyEnabled

copySourceSSECustomerAlgorithm

copySourceSSECustomerKey

copySourceSSECustomerKeyMD5

requestPayer

requestPayer

tagging

tagging

objectLockMode

objectLockMode

objectLockRetainUntilDate

objectLockLegalHoldStatus

objectLockLegalHoldStatus

expectedBucketOwner

expectedSourceBucketOwner

destinationBucket

bucket

destinationKey

key

sourceBucket

sourceKey

sourceVersionId

overrideConfiguration

overrideConfiguration

retentionDirective

retentionExpirationDate

retentionLegalHoldId

retentionPeriod