Running the MQ sink connector

You can use the MQ sink connector to copy data from Event Streams or Apache Kafka into IBM MQ. The connector copies messages from a Kafka topic into a target MQ queue.

Kafka Connect can be run in standalone or distributed mode. This document contains steps for running the connector in distributed mode in OpenShift Container Platform. In this mode, work balancing is automatic, scaling is dynamic, and tasks and data are fault-tolerant. For more details on the difference between standalone and distributed mode see the explanation of Kafka Connect workers.

Prerequisites

To follow these instructions, ensure you have the following available:

IBM MQ v8 or later installed. Note: These instructions are for IBM MQ v9 running on Linux. If you’re using a different version or platform, you might have to adjust some steps slightly.

Setting up the queue manager

These sample instructions set up an IBM MQ queue manager that uses its local operating system to authenticate the user ID and password. The user ID and password you provide must already be created on the operating system where IBM MQ is running.

Log in as a user authorized to administer IBM MQ, and ensure the MQ commands are on the path.
Create a queue manager with a TCP/IP listener on port 1414: crtmqm -p 1414 <queue_manager_name> for example to create a queue manager called QM1 use crtmqm -p 1414 QM1
Start the queue manager: strmqm <queue_manager_name>
Start the runmqsc tool to configure the queue manager: runmqsc <queue_manager_name>
In runmqsc, create a server-connection channel: DEFINE CHANNEL(<channel_name>) CHLTYPE(SVRCONN)
Set the channel authentication rules to accept connections requiring userid and password:
1. SET CHLAUTH(<channel_name>) TYPE(BLOCKUSER) USERLIST('nobody')
2. SET CHLAUTH('*') TYPE(ADDRESSMAP) ADDRESS('*') USERSRC(NOACCESS)
3. SET CHLAUTH(<channel_name>) TYPE(ADDRESSMAP) ADDRESS('*') USERSRC(CHANNEL) CHCKCLNT(REQUIRED)
Set the identity of the client connections based on the supplied context (the user ID): ALTER AUTHINFO(SYSTEM.DEFAULT.AUTHINFO.IDPWOS) AUTHTYPE(IDPWOS) ADOPTCTX(YES)
Refresh the connection authentication information: REFRESH SECURITY TYPE(CONNAUTH)
Create a queue for the Kafka Connect connector to use: DEFINE QLOCAL(<queue_name>)
Authorize the IBM MQ user ID to connect to and inquire the queue manager: SET AUTHREC OBJTYPE(QMGR) PRINCIPAL('<user_id>') AUTHADD(CONNECT,INQ)
Authorize the IBM MQ user ID to use the queue: SET AUTHREC PROFILE(<queue_name>) OBJTYPE(QUEUE) PRINCIPAL('<user_id>') AUTHADD(ALLMQI)
Stop the runmqsc tool by typing END.

For example, for a queue manager called QM1, with user ID alice, creating a server-connection channel called MYSVRCONN and a queue called MYQSINK, you run the following commands in runmqsc:

DEFINE CHANNEL(MYSVRCONN) CHLTYPE(SVRCONN)
SET CHLAUTH(MYSVRCONN) TYPE(BLOCKUSER) USERLIST('nobody')
SET CHLAUTH('*') TYPE(ADDRESSMAP) ADDRESS('*') USERSRC(NOACCESS)
SET CHLAUTH(MYSVRCONN) TYPE(ADDRESSMAP) ADDRESS('*') USERSRC(CHANNEL) CHCKCLNT(REQUIRED)
ALTER AUTHINFO(SYSTEM.DEFAULT.AUTHINFO.IDPWOS) AUTHTYPE(IDPWOS) ADOPTCTX(YES)
REFRESH SECURITY TYPE(CONNAUTH)
DEFINE QLOCAL(MYQSINK)
SET AUTHREC OBJTYPE(QMGR) PRINCIPAL('alice') AUTHADD(CONNECT,INQ)
SET AUTHREC PROFILE(MYQSINK) OBJTYPE(QUEUE) PRINCIPAL('alice') AUTHADD(ALLMQI)
END

The queue manager is now ready to accept connection from the connector and put messages on a queue.

Configuring the connector to connect to MQ

The connector requires details to connect to IBM MQ and to your Event Streams or Apache Kafka cluster. You can generate the sample connector configuration file for Event Streams from either the UI or the CLI.

The connector connects to IBM MQ using a client connection. You must provide the following connection information for your queue manager:

Comma-separated list of Kafka topics to pull events from.
The name of the IBM MQ queue manager.
The connection name (one or more host and port pairs).
The channel name.
The name of the sink IBM MQ queue.
The user name and password if the queue manager is configured to require them for client connections.

Using the UI

Use the UI to download a .json file which can be used in distributed mode.

Log in to the Event Streams UI from a supported web browser (see how to determine the login URL for your Event Streams UI).
Click Toolbox in the primary navigation and scroll to the Connectors section.
Go to the Add connectors to your Kafka Connect environment tile and click Connecting to IBM MQ?
Ensure the MQ Sink tab is selected and click Generate.
In the dialog, enter the configuration of the MQ Sink connector.
Click Download to generate and download the configuration file with the supplied fields.
Open the downloaded configuration file and change the values of mq.user.name and mq.password to the username and password that you used to configure your instance of MQ.

Using the CLI

Use the CLI to generate a configuration file.

Log in to your cluster as an administrator by using the IBM Cloud Pak CLI:
cloudctl login -a https://<cluster_address>:<cluster_router_https_port>
Run the following command to initialize the Event Streams CLI on the cluster:
cloudctl es init
Run the connector-config-mq-sink command to generate the configuration file for the MQ Sink connector.
For example, to generate a configuration file for an instance of MQ with the following information: a queue manager called QM1, with a connection point of localhost(1414), a channel name of MYSVRCONN, a queue of MYQSINK and connecting to the topics TSINK, run the following command:
```
cloudctl es connector-config-mq-sink --mq-queue-manager="QM1" --mq-connection-name-list="localhost(1414)" --mq-channel="MYSVRCONN" --mq-queue="MYQSINK" --topics="TSINK" --file="mq-sink" --format yaml
```
Note: Omitting the --format yaml flag will generate a mq-source.properties file which can be used for standalone mode. Specifying --format json will generate a mq-source.json file which can be used for distributed mode outside OpenShift Container Platform.
Change the values of mq.user.name and mq.password to the username and password that you used to configure your instance of MQ.

The final configuration file will resemble the following:

apiVersion: eventstreams.ibm.com/v1alpha1
kind: KafkaConnector
metadata:
  name: mq-sink
  labels:
    # The eventstreams.ibm.com/cluster label identifies the KafkaConnect instance
    # in which to create this connector. That KafkaConnect instance
    # must have the eventstreams.ibm.com/use-connector-resources annotation
    # set to true.
    eventstreams.ibm.com/cluster: <kafka_connect_name>
spec:
  class: com.ibm.eventstreams.connect.mqsink.MQSinkConnector
  tasksMax: 1
  config:
    topics: TSINK
    mq.queue.manager: QM1
    mq.connection.name.list: localhost(1414)
    mq.channel.name: MYSVRCONN
    mq.queue: MYQSINK
    mq.user.name: alice
    mq.password: passw0rd
    key.converter: org.apache.kafka.connect.storage.StringConverter
    value.converter: org.apache.kafka.connect.storage.StringConverter
    mq.message.builder: com.ibm.eventstreams.connect.mqsink.builders.DefaultMessageBuilder

A list of all the possible flags can be found by running the command cloudctl es connector-config-mq-sink --help. Alternatively, See the sample properties file for a full list of properties you can configure, and also see the GitHub README for all available configuration options.

Downloading the MQ Sink connector

Log in to the Event Streams UI from a supported web browser (see how to determine the login URL for your Event Streams UI).
Click Toolbox in the primary navigation and scroll to the Connectors section.
Go to the Add connectors to your Kafka Connect environment tile and click Connecting to IBM MQ?
Ensure the MQ Sink tab is selected and click Go to GitHub. Download the JAR file from the list of assets for the latest release.

Configuring Kafka Connect

Follow the steps in Set up a Kafka Connect environment. When adding connectors, add the MQ connector JAR you downloaded, and when starting the connector, use the YAML file you created earlier.

Verify the log output of Kafka Connect includes the following messages that indicate the connector task has started and successfully connected to IBM MQ:

$ oc logs <kafka_connect_pod_name>
...
INFO Created connector mq-sink
...
INFO Connection to MQ established
...

Send a test message

To test the connector you will need an application to produce events to your topic.

Log in to the Event Streams UI from a supported web browser (see how to determine the login URL for your Event Streams UI).
Click Toolbox in the primary navigation.
Go to the Starter application tile under Applications, and click Get started.
Click Download JAR from GitHUb. Download the JAR file from the list of assets for the latest release.
Click Generate properties.
Enter a name for the application.
Go to the Existing topic tab and select the topic you provided in the MQ connector configuration.
Click Generate and download .zip.
Follow the instructions in the UI to get the application running.

Verify the message is on the queue:

Navigate to the UI of the sample application you generated earlier and start producing messages to Event Streams.
Use the amqsget sample to get messages from the MQ Queue:
/opt/mqm/samp/bin/amqsget <queue_name> <queue_manager_name>
After a short delay, the messages are printed.

Advanced configuration

For more details about the connector and to see all configuration options, see the GitHub README.